FS: Built Boosted Integra in SC
Thread Starter
Joined: Jul 2005
Posts: 226
Likes: 0
From: Beaufort, SC, USA
FS: Built Boosted Integra in SC
Well i am selling the car to move onto my next project. It put down 428hp on 16psi on a conservative tune. The setup has 5500 miles on it and 2500 miles of it is boosted. I am asking $9500 obo, there is alot of work and time in this car so please no lowballers.
SPECS:
94 integra RS, with (pretty much) full ITR interior
Motor:
GSR block w/ JE pistons, eagle rods
ITR head with ITR cams, STR adj cam gears
Ferrera valves
Rocket valve springs w/ Omni power retainers
Hondata intake mani gasket
AEBS intake mani w/ BBK 70mm TB
STR fuel rail w/ RC 750cc saturated injectors
Paxton FPR, Walbro 255 fuel pump
Garrett t03-04 e .57 trim .60 a/r
3" charge pipes fabbed by ST performance as well as equal lenght mani
Tial BOV, and 38mm Wastegate w/ 40mm head
3" DP and K-teller exhaust piping w/ 3" magna flow muffler
Precision 600hp(rated) intercooler
Golden Eagle oil block/ vaccum block
ARP headstuds
GSR tranny with carbon syncros
ACT 6 puck unsprung clutch w/ pressure plate
ELECTRONICS:
Hondata S200 (boost, datalogging ect)
greddy (boost, egt, oil pressure) guages, Turbo timer
Apexi AVCR (mounted in arm rest)
JDM ITR cluster
SUSPENSION:
Ground Control coilovers w/ Tokico blue struts
Benin 3 point front upper strut bar
Suspension Techniques rear lower sway bar
16x7 Rota Slipstreams
Any questions feel free to ask.
SPECS:
94 integra RS, with (pretty much) full ITR interior
Motor:
GSR block w/ JE pistons, eagle rods
ITR head with ITR cams, STR adj cam gears
Ferrera valves
Rocket valve springs w/ Omni power retainers
Hondata intake mani gasket
AEBS intake mani w/ BBK 70mm TB
STR fuel rail w/ RC 750cc saturated injectors
Paxton FPR, Walbro 255 fuel pump
Garrett t03-04 e .57 trim .60 a/r
3" charge pipes fabbed by ST performance as well as equal lenght mani
Tial BOV, and 38mm Wastegate w/ 40mm head
3" DP and K-teller exhaust piping w/ 3" magna flow muffler
Precision 600hp(rated) intercooler
Golden Eagle oil block/ vaccum block
ARP headstuds
GSR tranny with carbon syncros
ACT 6 puck unsprung clutch w/ pressure plate
ELECTRONICS:
Hondata S200 (boost, datalogging ect)
greddy (boost, egt, oil pressure) guages, Turbo timer
Apexi AVCR (mounted in arm rest)
JDM ITR cluster
SUSPENSION:
Ground Control coilovers w/ Tokico blue struts
Benin 3 point front upper strut bar
Suspension Techniques rear lower sway bar
16x7 Rota Slipstreams
Any questions feel free to ask.
Honda-Tech Member
Joined: Aug 2005
Posts: 1,320
Likes: 0
From: Close to the beach, NJ, U.S.A
Thread Starter
Joined: Jul 2005
Posts: 226
Likes: 0
From: Beaufort, SC, USA
Re: (gunmetalej)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gunmetalej »</TD></TR><TR><TD CLASS="quote">wish you would trade for this
https://honda-tech.com/zerothread?id=1588572</TD></TR></TABLE>
how many miles on setup?
https://honda-tech.com/zerothread?id=1588572</TD></TR></TABLE>
how many miles on setup?
