i wanted to swap the brakes from a dc5 integra type r on to my eg but i was wondering what other parts would i need becides the brembo rotors and calpers...

 

*sigh*

You will need to machine the rotors to 4x100, unless you converted to 5 lug.
You will need ex/si/abs/integra knuckles, unless you have one of those.
You will WANT a 15/16" or 1" master cylinder from an abs civic or integra.
You may need some 5mm wheel spacers, depending on application.
You will need to search in the future, because this has been covered before and answering the same questions over and over and over again drives people crazy

 

isnt that what HT is here for though?? we love to answer questions that people are too lazy to search for.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by keemosaki &raquo;</TD></TR><TR><TD CLASS="quote">isnt that what HT is here for though?? we love to answer questions that people are too lazy to search for.</TD></TR></TABLE>

haha....haha....

 

I made the same thread on k20a.org and what i got from there is dat i cant use a dc5 drake setup only one from the older dc2....n im sorry if bringing up this topic up again but im really strapped 4 time .. to make ur jobs easier u could give me the url to the thread that covers this

 

if you want brembos that will fit. go to this link and look at my post..

still made by brembo and works on hondas, and acuras 4 lug or 5 lug

https://honda-tech.com/zerothread?id=1440491