i fabricated a set of individual throttle body's for my 91 crx si w/ a gsr swap but the motor went so im selling them now. these are built for a daily driven application utilizing stock injector location and short untapered runners. there is also i nifty idle control **** for on the run adjustment. these are done the right way no bull ****

the project has about 40hrs invested into it with great success.

ITB's: $600 obo





-honda 954rr itb's
-honda tps sensor (plug and play)
-honda gsr head flange (dilled and tapped w/ barb fittings)
-honda iat sensor
-honda map sensor
-all necessary vacumm lines (minus brake booster)
-shc. 40 runners
-precision tig'd
-runners port matched to head flange

also includes custom vacumm log. vacumm source is provided by 4 barb fittings drilled and tapped into the factory motorcycle injector locations. the log has one barb for the brake booster, one and one for the fpr. both the map sensor and iat sensor are drilled and tapped into the log as well.

 

pretty strait forward instal?

 

TTT Those are very nice looking.