ok i have a tdo4 pos and a xsmani yah i know... anyhow i ordered a cc-fab Log mani i have a stock d16y7 but i bought eagle rods and plan on getting suzuki vitara pistons. i plan on upgrading to rc550s.. from the dsm blue tops. and tuned with crome. i plan on getting about 300-320 whp .. which t3/4 turbo should i be using what AR trim and all that jaz.. i want decent midrange and topend i dont want the spoolin up at 2200 rpm td04 but i dont wanna be laggin all day since my comp will be very low with the vitara pistons.. gimmie ur input on this so i can decide myself and start shopping for one thanks alot

 

bump darnit

 

ok with a regular t/3 .42cold/.48hot be a good turbo to use?? will it support 340 whp ??

 

bump anyone??

 

Suzuki Pistons?????? what is the benefit of these over stock?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96 GSR-T &raquo;</TD></TR><TR><TD CLASS="quote">Suzuki Pistons?????? what is the benefit of these over stock?</TD></TR></TABLE>

lower cr and a bit stonger, however, they are louder due to the wrist pins or something like that

 

i dont really care if they are loud ..lol so is makes a clatter sound when they warm up the expand and arent as noisy they hold boost and thats all that counts .. not a ddaily driver anyhow just a weekend beater anyone else what turbo should i run .. will the one i mentioned earlyier be good for the hp i want to make (stated earlier in the thread) thanks

 

1) Learn to read a compressor map
2) Get bigger injectors
3) Don't bump your post every 30 minutes.