New and improved pics of the crackers' WIP!! 7 Pics! 1024 x 768
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 1,344
Likes: 10
From: Austin, Texas, US
New and improved pics of the crackers' WIP!! 7 Pics! 1024 x 768
Well I was at a friends house today and was about to leave and metioned to him how my camera sux. So he asked If I wanted him to take some pics with his camera. I said sure. Its amazing how much the diffrence in pics are changed by a nice camera. These were a few of them from just a quick 5 minute shoot. Only diffrence from the last time I posted pics Is I lowered my car some more. 
**EDIT Engine pics***
Modified by ImAcracker at 8:03 PM 4/3/2006
**EDIT Engine pics***
Modified by ImAcracker at 8:03 PM 4/3/2006
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 1,344
Likes: 10
From: Austin, Texas, US
Re: New and improved pics of the crackers' WIP!! 7 Pics! 1024 x 768 (Hondizzle!)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hondizzle! »</TD></TR><TR><TD CLASS="quote">What size dp are you running??</TD></TR></TABLE>
3 inch.
3 inch.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 1,344
Likes: 10
From: Austin, Texas, US
Re: New and improved pics of the crackers' WIP!! 7 Pics! 1024 x 768 (unknown.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by unknown. »</TD></TR><TR><TD CLASS="quote">motor shots FTW!</TD></TR></TABLE>
Oh snap!! I totally forgot about that. I can post some tommorow but It wont be with the nice *** camera these pics were taken with. I will try my best with mine.
Oh snap!! I totally forgot about that. I can post some tommorow but It wont be with the nice *** camera these pics were taken with. I will try my best with mine.
Honda-Tech Member
Joined: Jun 2004
Posts: 3,061
Likes: 0
From: Plano, TX, USA
Re: New and improved pics of the crackers' WIP!! 7 Pics! 1024 x 768 (Usagi Yojimbo)
I like the way your front bumper is cut out...
Im also running a big IC, Precision Large.
Im going to take a pic of your bumper, take it to the body shop and have them make my bumper like that....
props to bad *** ****.
Im also running a big IC, Precision Large.
Im going to take a pic of your bumper, take it to the body shop and have them make my bumper like that....
props to bad *** ****.
Honda-Tech Member
Joined: Sep 2005
Posts: 922
Likes: 0
From: Greenville, SC, USA
Re: New and improved pics of the crackers' WIP!! 7 Pics! 1024 x 768 (one^g)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Markis. »</TD></TR><TR><TD CLASS="quote">lol your car should have been in the nelly video..... Cause your car got grillz!</TD></TR></TABLE>
hahahahaha
hahahahaha
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 1,344
Likes: 10
From: Austin, Texas, US
Re: New and improved pics of the crackers' WIP!! 7 Pics! 1024 x 768 (JDM00SI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM00SI »</TD></TR><TR><TD CLASS="quote">I like the way your front bumper is cut out...
Im also running a big IC, Precision Large.
Im going to take a pic of your bumper, take it to the body shop and have them make my bumper like that....
props to bad *** ****.</TD></TR></TABLE>
Nah man. You can do it yourself. I did. Just trace the line on your bumper first before you cut. Make sure its all good take measurements and all then go at it with a dremel. I tried a utility nife at first but it came out wobbley. After the dremel you will need a file to smooth out the edges cuz the dremel will melt the plastic. Good luck with it. Hope to see more people rocking the FMIC in full effect. I personally love the way it looks cut out.
Im also running a big IC, Precision Large.
Im going to take a pic of your bumper, take it to the body shop and have them make my bumper like that....
props to bad *** ****.</TD></TR></TABLE>
Nah man. You can do it yourself. I did. Just trace the line on your bumper first before you cut. Make sure its all good take measurements and all then go at it with a dremel. I tried a utility nife at first but it came out wobbley. After the dremel you will need a file to smooth out the edges cuz the dremel will melt the plastic. Good luck with it. Hope to see more people rocking the FMIC in full effect.
I personally love the way it looks cut out.
