Anyone using either of these ?

 

do you really think nobody in this humongous site uses one of these?

one search, really, ONE, would have brought up at least 20+ cars with one on there

 

I use AEM. Did you have any questions in particular?

 

How is the quality/fit ? Any problems with it at all ?

 

No problems with the fuel rail at all. I use the AEM fpr with it. I am having an issue with that, but not the fuel rail.

 

Yea i heard that the fuel pressure reg does give some problems. Are u running it on a 5th gen ?

 

4th.

 

What problems are you having ?

 

There is a very loud schreeching sound coming from the fpr. This weekend I am pulling it off to inspect for cracks and o ring damage.

 

I used the STR fuel rail with an AEM fpr and it was a nightmare!!! The fuel rail kept coming loose no matter how hard I tightened the bolts down and it made the car flood out after 6000rpm even with the pressure turned down to 15psi!!! Put the stock stuff back on and have no problems whatsoever....

 

well i dont think your exactly supposed to tighten it that much...that could cause stripping and cracks.

 

im using the STR fuel rail with AEM FPR and the only problem I had is that I had to make a 1" spacer so the fpr didnt hit the intake manifold