ive seen some say 210hp and 200hp for 98+ jdm type r engine specs...which hp is it

 

DC2 ITR's have the same hp in all markets.

 

alrite then how many hp they have 210 or 200hp???

 

HA!!!!!! I too have wondered this question, b/c different websites tel u different stuff...some 200hp some 210hp........amd dont give me that "there all the crap!" either. Because there most have been a mix up or something

 

200hp +/- 10 hp

 

well this is the itr forum..u guys should know this cmon now..

 

i thought it was 205ps

 

the JDM ITR is rated at 210ps which is roughly 209hp.

 

98-Up Integra Type R
(JDM) B18C 16 Valve DOHC VTEC
1797cc
PGM-FI MPFI 210 bhp @8100 8900 rpm 18.5Nm lbft @ 7500

I believe the 96 and 97 specs (JDM) were 200 bhp

 

Out of Car and Driver in 1997

 

Check here for reviews of the ITR from '97-'01.... More specifically you can find the specs on the motors...

http://www.itrsport.com/reviews.html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reid &raquo;</TD></TR><TR><TD CLASS="quote">DC2 ITR's have the same hp in all markets. </TD></TR></TABLE>

i guess thats why the us market itr have a lower compression

 

All of my brochures for the JDM ITR state 200ps, for both the 96 Spec and 98 Spec. There was an increase in torque for the 98 Spec (though I cannot recall the exact number offhand). I can scan the brochures in when I get back to Japan.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98ekhx &raquo;</TD></TR><TR><TD CLASS="quote">i guess thats why the us market itr have a lower compression</TD></TR></TABLE>

Ok, Captain Obvious, what's your point?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Swell_Ryder &raquo;</TD></TR><TR><TD CLASS="quote">Out of Car and Driver in 1997

</TD></TR></TABLE>

that is for an Acura, the OP is asking about a JDM ITR.

 

Another thing, 200ps = 197hp.

 

They both have the same hp (JDM) 200hp but the 98spec has an extra 5nm of torque.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chargedek &raquo;</TD></TR><TR><TD CLASS="quote">They both have the same hp (JDM) 200hp but the 98spec has an extra 5nm of torque.</TD></TR></TABLE>

Japanese measures horsepower in metric hp (ps), so it is rated at 200ps.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reid &raquo;</TD></TR><TR><TD CLASS="quote">

Japanese measures horsepower in metric hp (ps), so it is rated at 200ps. </TD></TR></TABLE>
The difference between ps and hp is miniscule(sp?)
So maybe 199hp

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chargedek &raquo;</TD></TR><TR><TD CLASS="quote">The difference between ps and hp is miniscule(sp?)
So maybe 199hp</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reid &raquo;</TD></TR><TR><TD CLASS="quote">Another thing, 200ps = 197hp.</TD></TR></TABLE>

 

You have a good point there Reid....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YumVTEC &raquo;</TD></TR><TR><TD CLASS="quote">

that is for an Acura, the OP is asking about a JDM ITR.</TD></TR></TABLE>

THEN REID SAID

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reid &raquo;</TD></TR><TR><TD CLASS="quote">DC2 ITR's have the same hp in all markets. </TD></TR></TABLE>

THEN I SAID<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Swell_Ryder &raquo;</TD></TR><TR><TD CLASS="quote">Out of Car and Driver in 1997

</TD></TR></TABLE>

 

i thought jdm r's were 200hp, usdm were like 195?

 

We're splitting hairs here. I'm sure the variance in motors makes up for whatever little difference their might have been. Throw in a few thousand miles and things change a little. Its' roughly 200 hp. And most dyno 160-175 stock.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DJsilkyjr &raquo;</TD></TR><TR><TD CLASS="quote">i thought jdm r's were 200hp, usdm were like 195?</TD></TR></TABLE>

Read the thread, we have already gone over this.

 

I thought the intake and exhaust cams were different between markets?

*hides*