Need some help
Thread Starter
Honda-Tech Member
Joined: Sep 2005
Posts: 411
Likes: 0
From: somewhere, tx, United States
Need some help
Bought my project car (94 Integra) a couple weeks ago and realized this today.
One of the studs is broken in half. Anyone know what exactly it will intale too get it replaced?
One of the studs is broken in half. Anyone know what exactly it will intale too get it replaced?
Honda-Tech Member
Joined: Jul 2005
Posts: 2,563
Likes: 2
From: SSF, CA
Re: Need some help (Bradle3)
You will have to get the hub pressed out and the stud knocked out. That **** cost way to much money, if i were you id just buy a used hub assembly from a junk yard or HT market place. It will come with rotor, brack bads and even a brake caliper.
Honda-Tech Member
Joined: Dec 2004
Posts: 3,986
Likes: 0
From: Commufornia
Re: Need some help (Bradle3)
take all of the shields off around it and hit it out with a hammer then put a new wheel stud in, it is kind of tricky the first time but im sure you can firuge it out
Honda-Tech Member
Joined: Jul 2005
Posts: 2,563
Likes: 2
From: SSF, CA
Re: Need some help (Bradle3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_dc_fan »</TD></TR><TR><TD CLASS="quote">hit it out with a hammer and pull the new one through by tightening with your rim</TD></TR></TABLE>
its not only the sheild thats in the way, you will have to get the hub pressed out, trust me i have done it before.
its not only the sheild thats in the way, you will have to get the hub pressed out, trust me i have done it before.
Thread
Thread Starter
Forum
Replies
Last Post
