Ok, I've searched for 6 hours now and cannot find a definite answer. I'm making my own OBD0-1 distributor adapter harness. I know you match wire color for wire color, but on the OBD0 side you have a white wire, and a white wire with a red tag, and on the OBD1 you have a white wire and a yellow wire with green stripe. Exactly what wire goes where? I've read the fat white wire goes to the yellow/green, but both white wires are the same size. Can anyone who has successfully done this and is 100% sure of themself please let me know. The turbo is in the garage and is going to stay there until I get everything figured out Thanks in advance