i just intalled my tuner toys block fitting that is going to be used on my turbo project. I have an after market oil pressure sender at the end of it. there are 2 holes on the side. One of them is pluged with a 1/8npt cap and the other is pluged with my stock oil pressure unit 1/bspt. It issn't connected to anything, i kinda broke it off. Now my cabin starts to smell like burnt oil when im at a red light. Im not loosing hardly any oil, but im starting to get sick due to the oil smell in my cabin. Do you guys think the smell is coming from the stock oil pressure or its something else.

 

the side ones are for gauges, oil lines..etc and the back female is for the oil sender. sides are npt and others are bspt. i think u have it on wrong.

 

even the slightest bit of oil , if it drips onto the engine or someother area where its hot will cook the oil and make it smell.. and it will stink up that cabin

 

when i installed my tunertoys fitting, the plug was leaking the first time i tried it. dont overthread the plugs, or there will be less threads to seal off the oil.

the stock pressure sender goes on the very end.