Anybody now how to get these off without breaking all the clips, or bending the molding. I need to refurbish them. The chrome is showing.

 

I would like to know too. my beaters are in excellent condition while my projects are kinda shitty....definately wanna swap

 

take off the #29 screws and if u pull up on that molding, that one comes off. than the bottom one should come off with pretty easy by pulling it up.

 

Kinda what the guy above me said, but piece 5/7 snaps in at the top. Pull out and it should pop out fine, then the bottom slides out from the edge of the window molding. The just take the window molding and pull up.

 

Alright I'll give it a shot. Thankz fellas.

 

Well that wasn't it... But I do know how now... I also have pics. Posting soon.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nevaeh Speed &raquo;</TD></TR><TR><TD CLASS="quote">Well that wasn't it... But I do know how now... I also have pics. Posting soon.</TD></TR></TABLE>
What do you mean it isnt it? I did this just the other day and have done it a handful of other times too.

 

This is how I did it.

I removed the mirror, and the b pillar piece. the I lifted the molding up a tiny bit, then used a baby flat head screw driver a pressed the little tabs in on the clips. One @ a time, push in, then lift a bit more, over and over again. hen it just came of with ease.






Hope this helps everyone. I'll repost on this topic again, when I strip them and paint them back black.

 

I see you finally go that damn molding off. Good sh*t. Best of lucky brotha.