Hi, I have an '88 CRX Si and I wanna replace the shifter bushings. I really have no idea how to do this so ANY and ALL details would be greatly appreciated.

Thanks in advance.

 

Pretty simple. Get yourself the required kit from someone like energy suspension (I get all of my stuff from suspension.com). It will be a two piece kit, one round bushing that sits in the cirlce part of the linkage towards the frong of the car, the second pice is one that actually holds the linkage to the chassis, it is towards the rear of the linkage. Really simple and straight forward...order the parts, jack up your car, and you will figure it out.

 

https://honda-tech.com/zerosearch its all right here

 

Give me 20 minutes, and I'll take pictures illustrating the bitch points

 

ISSUES
Linkage has a flare wider then hole in bushing, no amount of grease and pressure will put it on. I had to minimally enlarge hole to allow linkage access.

Sleeve for bolt was actually too narrow, had to enlarge with drill bit.

 

hmm...ic....

thanks man!

greatly appreciated