Alright, heres the situation. I have a 92 integra with a b16 that im swapping into a crx i got not too long ago. I plan on running obd-1. My question is, would it make more sense to go with the full rywire kit from rywire.com for $190.00, or to use my existing harness from the integra (obd-1)? I figured since i have the harness why not? But im not sure if its a time consuming or difficult job to do. Let me know what you guys would do in a situation like this. Money is not an issue being that i just sold 1 of 3 cars that i own. Thanks in advance.

Abe

 

TTT!, i need some help guys.

 

Bump! does anybody have and experience with this? If so chime in please. I need to know tonite so i can either order or take apart my existing harness. HELP!

 

get rywires kit. save the headache.

what ecu do you want to run?

 

Putting that da harness in a 88-91 is a pita

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doublethink &raquo;</TD></TR><TR><TD CLASS="quote">get rywires kit. save the headache.

what ecu do you want to run?</TD></TR></TABLE> Im running a chipped/socketed P61 ecu (uberdata ready) with an all motor program right now.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by droppedcrxsi &raquo;</TD></TR><TR><TD CLASS="quote">Putting that da harness in a 88-91 is a pita </TD></TR></TABLE> By Pita, what do u mean? i heard that before, but i dunno if it means easy or difficult?

 

PITA= Pain In The Ass

 

oh, thanks ......Is the rywire kit a full plug and play kit, or do i have to splice some wires on the harness regardless?

 

TTT!

 

c'mon guys! anybody use a full obd-1 harness in a crx si? how was installation?

 

Rywire= plug and play Its not required to use obd1 injectors.... The only thing is that you have to extend the fan switch to the thermostat housing... or sent the harness to me and ill do it

 

The thing is I have obd-1 injectors. The CRX i bought didn't come with an engine, and the fuel rail harness didn't come with it as well i believe. Is this going to be a problem???

 

If you have obd1 inj, just solder all the wires that went to the inj box together... I can do it for you as well

 

My guy i bought the car from has the obd-0 fuel injector/harness for the si and hes gonna give it to me for free. I just dont want the headache of having to splice/solder anything. I ordered my rywire kit lastnite (11ish) and i overnighted it. Do you know when it should be here?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92DA9B16a &raquo;</TD></TR><TR><TD CLASS="quote"> I ordered my rywire kit lastnite (11ish) and i overnighted it. Do you know when it should be here?</TD></TR></TABLE>

I built it thus morning, and sent it express today, it should have sent delivery conf. to your email Lemme know, pm me for more info
Ryan

 

thanks alot, i got the confirmation.

 

I got the kit in the mail today. That is the cleanest most simple kit i've ever seen. I love it. Now to pull the motor out! I was gonna do it today but i had work and on top of that it was cold. I'll prob do it tomorrow or sun. I'll let you guys know how it turns out.

 

Sorry i didn't update any sooner guys! the swap came out PERFECTLY, the car starts and runs beautifly. Hasn't thrown a code yet. I never felt an engine pull so hard in such a light car (for me atleast) I love it!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92DA9B16a &raquo;</TD></TR><TR><TD CLASS="quote">Sorry i didn't update any sooner guys! the swap came out PERFECTLY, the car starts and runs beautifly. Hasn't thrown a code yet. I never felt an engine pull so hard in such a light car (for me atleast) I love it!</TD></TR></TABLE>

Ah! Good to hear man

Ryan