I thought I remembered reading 96-00 civics were 56.1mm, correct or no?

I know i'll have to call up Buddy Club to find the size of their SF rims for the outer size.

 

anyone?

 

That's correct. Most Civics, including the '96-00, and most Integras, have a 56 mm hub and center bore.

 

wicked thanks. Ordered the hub centric ring 56.15 I.D. and 70mm O.D. for my Buddy Club SF rims

 

Where did you get your hub ring from?

By the way, EX and Si civics that year are a 64.1mm bore. The 56.1 is for the DX models.

 

only honda/acura cars that were 64mm bore were 4x114 and 5x114 cars, nsx was slightly different.

all preludes, del sol, crx, accord, civics and integra w/ 4x100 were 56mm

http://cgi.ebay.com/ebaymotors...ZWD1V

check there

 

nope. it depends on year and model. The Civic EX/Si (99) were 64.1mm.

certain 5x114.3 are 64.1 like the RSX.

However, the old Legend, 97 Prelude, S2000, and more are 70.1mm. Since the early 90s at least, there are three Honda front hub centers. That website isnt 100% accurate, but then again, most arent. I'll add this to my chart page.

 

maybe you should reread my statement...what i meant was that 4x100 cars did not have 64.1mm. only select 114.3 cars did.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BrakeExpert &raquo;</TD></TR><TR><TD CLASS="quote">The Civic EX/Si (99) were 64.1mm.

s2000 70.1</TD></TR></TABLE>

WRONG. all 4x100 hondas are 56.1mm

well you were half right on s2k part: front is 70.1mm rear is 64.1mm

add this to your chart also.. you are wrong and quit giving noobs bad information.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">4x100 cars did not have 64.1mm. only select 114.3 cars did.

all 4x100 hondas are 56.1mm

s2k: front is 70.1mm rear is 64.1mm


</TD></TR></TABLE>

quoted for the truth..

go remeasure those oem 4x100 honda/acura hubs brake 'expert' haha

even the ep3, em2 civic 4x100 had 56.1 along w. the 99-00 civic ex/si because if they didn't then why do my stock em2 15" steel rims, 99-00 si rims all fit and interchange hubcentrically on my 1994 integra and on my 99 civic ex?

 

WRONG!

Quit assuming. I'm sorry but NOT all 4x100 hubs were 56.1mm. Go measure!! I HAVE checked this myself! Go find a 96 Civic EX and 96 Civic DX and go measure the diameter of the center of the hub. They are NOT the same!! Take a 96 Civic hatch 13" steelie and see if its hubcentric on your 99 Si. You are too quick to assume. Bolt a 9.5" rotor onto a EM2, it cannot fit. BTW, the 90-95 Integras have a 64.1mm centerbore.

 

you guys should stop pissing on each other. i personally "think/know" that the 4x100 hub are all 56.1mm.

until further information(pics) from the so called brakeexpert to back up his claim, we stand corrected. believe me, the si rims fit hubcentrically on my integra.

 

Its 64.1mm for some 4x100 hubs. I am 100% sure and will post pictures tomorrow, that cool?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BrakeExpert &raquo;</TD></TR><TR><TD CLASS="quote">WRONG!

Quit assuming. I'm sorry but NOT all 4x100 hubs were 56.1mm. Go measure!! I HAVE checked this myself! Go find a 96 Civic EX and 96 Civic DX and go measure the diameter of the center of the hub. They are NOT the same!! Take a 96 Civic hatch 13" steelie and see if its hubcentric on your 99 Si. You are too quick to assume. Bolt a 9.5" rotor onto a EM2, it cannot fit. BTW, the 90-95 Integras have a 64.1mm centerbore.</TD></TR></TABLE>

nobody is assuming... i know it for a fact... 56.1 mm it is.....you can measure em, take your pictures, measure all the oem rims and steelies you got and in the junkyards...look up all the hubcentric spacers/adapters ever made for 4x100 hondas and they are all 56.1 mm. call up anybody...any reputable company/wheel shop.... and ask them...sh*t call up HONDA lol.....they are 56.1 mm all 4x100 hondas are 56.1mm and ill take that to the grave.


why would honda make 114.3 hubs in 64 mm ?and then make 4x100 hubs in 64 mm and 56 mm ? tell me why ? why?

maybe your brake rotors are premade to fit over any 'smaller' honda hub but you are wrong about this.. all civic delsol integra older prelude crx any 4x100 honda is 56.1 mm....quote me

 

http://search.yahoo.com/search...t-104

keyword 'civic center bore 56.1'

http://search.yahoo.com/search...t-104

keyword integra center bore 56.1


dc integra or ek civic is 64.1for japan spec R : 4x114(itr) and/or 5x114 patterns

 

BrakeExpert, please show supporting evidence what you are saying, because I can't seem to find any.

Here is a hint ---&gt; all 4x100 hondas are 56.1mm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doostur &raquo;</TD></TR><TR><TD CLASS="quote">BrakeExpert, please show supporting evidence what you are saying, because I can't seem to find any.

Here is a hint ---&gt; all 4x100 hondas are 56.1mm</TD></TR></TABLE>

waiting for a response....


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">

nobody is assuming... i know it for a fact... </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BrakeExpert &raquo;</TD></TR><TR><TD CLASS="quote">However, the 97 Prelude are 70.1mm.</TD></TR></TABLE>

more misinformation

time to change you SN

 

"unbrakeable" = broken

56.1, the possum speaks the truth..

 

56.1

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">maybe you should reread my statement...what i meant was that 4x100 cars did not have 64.1mm. only select 114.3 cars did.

WRONG. all 4x100 hondas are 56.1mm

well you were half right on s2k part: front is 70.1mm rear is 64.1mm

add this to your chart also.. you are wrong and quit giving noobs bad information.

</TD></TR></TABLE>

 

all 4x100 honda/acuras are

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IT’S ME DAVID &raquo;</TD></TR><TR><TD CLASS="quote">56.1,56.1,56.1,56.1,56.1,56.1,56.1,5 6.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1
,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1 ,56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,
.56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1 ,56.1,56.1,56.1,56.1,56.1,56.1,
56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1,56.1, 56.1,56.1,56.1,56.1,56.1,56.1,</TD></TR></TABLE>

 

56.1 for 4x100 honda center bore
<FONT SIZE="2">56.1 for 4x100 honda center bore</FONT>
<FONT SIZE="3">56.1 for 4x100 honda center bore</FONT>
<FONT SIZE="4">56.1 for 4x100 honda center bore</FONT>
<FONT SIZE="5">56.1 for 4x100 honda center bore</FONT>

 

'56.1 for 4x100 honda center bore'

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">you are wrong and quit giving noobs bad information.

</TD></TR></TABLE>

yeah man.... why are you trying to give us noobs bad info brake 'expert'?

just stick to repainting mugen calipers and lay off the pipe

hahahaha

 

IN BEFORE THE 56.1 LOCK!