FS:3Bar Map,I/C w/piping,RC 650cc's,MSD Cap,Blaster Coil
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Jun 2004
Posts: 1,517
Likes: 0
From: The Racers Edge
FS:3Bar Map,I/C,RC 650cc's,MSD Cap,Blaster Coil,BOV's,and more
For sale,will be listing up on e-Bay here soon,if it doesnt sell on here within next couple of days.
Used,but in excellent condition,Moroso Aluminum B-series oil pan.Genuine Moroso pan,not some cheap knock-off or like the cheapass obx ones that dont fit right,it has the high-quality drain plug with magnet,turbo oil return bung,with plug and another bung on the backside for gauge,whatnot,in excellent shape,will work with any B-series block,gsr,type r,si,i had it on my turbo ls/vtec,and it worked great.I also have the moroso pickup for sale for a non-vtec block,if you have a vtec block,you just need to get a vtec pickup from anywhere.
price for the pan: $320 shipped
pickup: $40 shipped
Brand new,GM 3Bar Map sensor,with pigtail conversion harness:$65 shipped
RC 650cc,SATURATED INJECTORS with HIGH RESISTANCE Approx. 12-16 OHMS measured at 43 P.S.I.G.-used with only 837 miles on them,upgrading to 1kcc injectors due to higher boost:$305 shipped
REV-HARD Front Mount Intercooler,no damaged fins,polished finish.fits 88-00 civic,94-00 teg,and some preludes.used for about 3500 miles on my Si,works and fit perfectly:
$300 shipped NOTE-INTERCOOLER PIPING SOLD.PRICE IS JUST FOR INTERCOOLER.
MSD-Modified Cap and coil kit,and MSD Blaster SS coil,both brand new,still in boxes,for GSR:$125 shipped
New,Greddy Type RS (new style) Blow off Valve kit,in box with instructions,gasket and parts: $175 shipped
Used,Greddy Type S Blow off Valve,excellent working shape,looks new,no gasket or extra parts,just the BOV: $155 shipped
35mm/38mm stainless black wastegate steel elbow/reloacater: $35 shipped
Drag Cold Air Intake Kit for any turbo kit,2 piece stainless pcs,with thick blue rubber elbow,and a HKS blue dome style filter on the end.you can angle it to fit any engine bay,and get fresh air to the turbo: $110 shipped
Brand new Nippon Racing sleeve kit from Japan,can replace the sleeves in any B-series block,slightly stronger than stock sleeves: $300 shipped
SRS Airbag,complete undamaged airbags,srs unit,and all sensors,uncut harness,and more,all from a 98 acura integra.$500 shipped.
-New P73 JUN Race ECU-OBD1: $225 shipped
-94-01 Acura Integra GSR AEM V2 cold air intake with filter kit,barely used.$175 shipped.
01 Acura Integra Type-R OEM Fuel Pump,barely used for around 8k miles: $75 shipped.
B-series Vortech obx throttle body spacer,aluminum with bolts: $30 shipped
Plus i have a few more things,cant think of right now,ill post them up later.
My e-bay feedback list:
http://feedback.ebay.com/ebaym...E:UFS
Please contact me if interested in purchasing anything,i can accept paypal,etc.Thanks.
Modified by jsnm at 12:27 AM 3/23/2006
Used,but in excellent condition,Moroso Aluminum B-series oil pan.Genuine Moroso pan,not some cheap knock-off or like the cheapass obx ones that dont fit right,it has the high-quality drain plug with magnet,turbo oil return bung,with plug and another bung on the backside for gauge,whatnot,in excellent shape,will work with any B-series block,gsr,type r,si,i had it on my turbo ls/vtec,and it worked great.I also have the moroso pickup for sale for a non-vtec block,if you have a vtec block,you just need to get a vtec pickup from anywhere.
price for the pan: $320 shipped
pickup: $40 shipped
Brand new,GM 3Bar Map sensor,with pigtail conversion harness:$65 shipped
RC 650cc,SATURATED INJECTORS with HIGH RESISTANCE Approx. 12-16 OHMS measured at 43 P.S.I.G.-used with only 837 miles on them,upgrading to 1kcc injectors due to higher boost:$305 shipped
REV-HARD Front Mount Intercooler,no damaged fins,polished finish.fits 88-00 civic,94-00 teg,and some preludes.used for about 3500 miles on my Si,works and fit perfectly:
$300 shipped NOTE-INTERCOOLER PIPING SOLD.PRICE IS JUST FOR INTERCOOLER.
MSD-Modified Cap and coil kit,and MSD Blaster SS coil,both brand new,still in boxes,for GSR:$125 shipped
New,Greddy Type RS (new style) Blow off Valve kit,in box with instructions,gasket and parts: $175 shipped
Used,Greddy Type S Blow off Valve,excellent working shape,looks new,no gasket or extra parts,just the BOV: $155 shipped
35mm/38mm stainless black wastegate steel elbow/reloacater: $35 shipped
Drag Cold Air Intake Kit for any turbo kit,2 piece stainless pcs,with thick blue rubber elbow,and a HKS blue dome style filter on the end.you can angle it to fit any engine bay,and get fresh air to the turbo: $110 shipped
Brand new Nippon Racing sleeve kit from Japan,can replace the sleeves in any B-series block,slightly stronger than stock sleeves: $300 shipped
SRS Airbag,complete undamaged airbags,srs unit,and all sensors,uncut harness,and more,all from a 98 acura integra.$500 shipped.
-New P73 JUN Race ECU-OBD1: $225 shipped
-94-01 Acura Integra GSR AEM V2 cold air intake with filter kit,barely used.$175 shipped.
01 Acura Integra Type-R OEM Fuel Pump,barely used for around 8k miles: $75 shipped.
B-series Vortech obx throttle body spacer,aluminum with bolts: $30 shipped
Plus i have a few more things,cant think of right now,ill post them up later.
My e-bay feedback list:
http://feedback.ebay.com/ebaym...E:UFS
Please contact me if interested in purchasing anything,i can accept paypal,etc.Thanks.
Modified by jsnm at 12:27 AM 3/23/2006
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andy@AMR
Classifieds: Forced Induction
4
Apr 3, 2013 05:45 AM
pwrofdrm
Classifieds: Forced Induction
6
Aug 22, 2011 07:28 AM
