93 eg sedan, JDM B16A swap, auto/manual conversion, vtec and knock are wired, clutch starter signal is the only thing i can think of that would warrant a no crank. Any different ideas that im not seeing right now, please help, anything at all would help

btw, are the jdm pins numbered differently? i dont think so, cause i dont have a cel, with koeo.

thanks in advance guys and gals,
jb

 

did you just do the swap? Engine ground, bad starter, bad distributor

 

yes i just finished the swap, everything is in and wired, just wont crank, starter is not getting any juice i assume. Would the clutch signal prevent crank? The starter signal im questioning is pin B9, from the clutch when depressed in a manual? yay or nay?

 

does the starter try and crank, any sound? cause I had a problem one of my buddies screwed up the timing and it wouldnt crank either, got it fixed by timing....

 

i doubt its the timing, i didnt touch any of the belts i just dropped the whole motor in.

Does anyone have a diagram of how the clutch sensor is wired up? that would help me immensely.
thanks everyone.

 

going into the shop tomorrow to try and wire up that clutch sensor, hopefully that works, we'll find out, thanks for the help guys.
jb