benson sleeved short block
ok i have this benson sleeved 84mm gsr shortblock for sale
-it has maybe 5k miles of trouble free usage with 12lbs of boost tuned via neptune
-arias 9.2 to 1 pistons
-crower pro billet rods
-acl bearings
-polished crank
-had a brand new itr oil pump when built
will include oil pan and windage tray
im asking 2000 obo for this motor that costs much more if you build it from scratch


-it has maybe 5k miles of trouble free usage with 12lbs of boost tuned via neptune
-arias 9.2 to 1 pistons
-crower pro billet rods
-acl bearings
-polished crank
-had a brand new itr oil pump when built
will include oil pan and windage tray
im asking 2000 obo for this motor that costs much more if you build it from scratch


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM turbo DC »</TD></TR><TR><TD CLASS="quote">interested, you got PM</TD></TR></TABLE>returned
I am interested to know what kind of power you made with the block at 12 psi?
It is basically a complete bottom end? (minus alternator/AC comp. of course)
Was the crank balanced?
Modified by xrdriver at 3:20 PM 2/12/2006
It is basically a complete bottom end? (minus alternator/AC comp. of course)
Was the crank balanced?
Modified by xrdriver at 3:20 PM 2/12/2006
well i never dynoed it but i do know that with a bad clutch and only 2 trips down the quarter mile it pulled an 11.94 at 121.8 with a terrible 2.2 60 foot time...i could have done much better with some more practice,a clutch and a higher 2 step setting
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SONIC BOOM »</TD></TR><TR><TD CLASS="quote">bump for interest</TD></TR></TABLE>had lots of interest but i need a taker
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poizensol »</TD></TR><TR><TD CLASS="quote">pmed</TD></TR></TABLE>returned pm...all the sudden i have a lot of takers but sale is pending unless buyer cant come up with money by friday
Thread
Thread Starter
Forum
Replies
Last Post
SuperTwinz
Northern California (Sales)
11
Oct 5, 2008 09:38 PM
84.5MM Dart Block, Endyn RW Pistons w/ raised pin @ 13.5:1 Endyne Long Rods, Endyne Modified Oil Pum
Christian
For Sale
39
Sep 1, 2004 05:16 PM



