I am 90 percent of the way done with my motor swap. I am putting an f22b1 into a 92 civic cx. I am having a little trouble with the wiring because on the civic harness there are no connectors to go to my sensors for my radiator coolant. There are two sensors at the end of each radiator hose, so i was going to take the connectors from the f22 harness and run it to the ecu. If anyone can tell me what pinouts they go to, it would be a big help. Also when i turn the key to on but dont crank, all the lights come on except the check engine light so i cant get any codes. Could it be the person who had the civic before me disabled the light.

 

ask the hybrid forum

https://honda-tech.com/zeroforum?id=18