i have a 97 gsr with the n1 cat-back on it now and i want to know if it will still fit if i change over to the 98+ rear bumper where it exits . i was told it will not fit correctly please let me know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DeDonDeRosa &raquo;</TD></TR><TR><TD CLASS="quote">i have a 97 gsr with the n1 cat-back on it now and i want to know if it will still fit if i change over to the 98+ rear bumper where it exits . i was told it will not fit correctly please let me know </TD></TR></TABLE>

well check which part you have,, and look at the application on apexi website or call them up

 

it will fit fine. i used to have the apexi n1 on my 96 teg. then did th 98+ conversion and it lined up.

 

the only differences for years depends if it's a '00+ or not since the a-pipe lengths changed.

 

hes asking if the muffler will come out under the exhuast cutout on the rear bumper.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vi3tboy &raquo;</TD></TR><TR><TD CLASS="quote">hes asking if the muffler will come out under the exhuast cutout on the rear bumper.</TD></TR></TABLE>
yes

 

yes it will, I just did my rear bumper swap, here is a pic

 

should fit cleanly..... Hey is that a 5 lug conversion????

 

It should fit. The A'PEXi piping from the axle back is the same from 94-97 and 98-00.

 

it will fit. i just finished putting on my 98 rear and i have an apexi n1 too.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SlammedDC2teg &raquo;</TD></TR><TR><TD CLASS="quote">yes it will, I just did my rear bumper swap, here is a pic
</TD></TR></TABLE>

sick!! more pics