As seen in this FAQ page,
https://honda-tech.com/zerothread?id=661308
I followed the instructions, but if I did it again, I probably wouldn't use so much paint. I think I put down like 4 or 5 coats. It's kinda dark but it is ok in areas where there isn't alot of ambient light, like on the country roads we have 'round herre. And here's a couple pics. Very hard to photograph with my camera. These low light shots, it just up's the exposure time so I gotta hold super still. Werd.
B


My interior is really the light gray color, not charcoal as it appears here.

 

i think it would look good! if i could see the pics

they are blurrrrrific. Try using "macro" mode. And dont shoot while driving

 

hah! no I didn't shoot while driving, but the car was running. I don't drive it much bcause there's no reg, ins, insp, or license. I say I don't drive it much and what I mean is I really don't leave the parking lot. License comes back in May so here we go!!
B

 

nice now do the heater / ac part!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JamesV &raquo;</TD></TR><TR><TD CLASS="quote">nice now do the heater / ac part!</TD></TR></TABLE>might aswell make it match

 

Damn that's a deep amber color. Looks almost red. Looks good, but get some better pix.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SoCal EJ1 &raquo;</TD></TR><TR><TD CLASS="quote">Damn that's a deep amber color. Looks almost red. Looks good, but get some better pix.</TD></TR></TABLE>

Yeah you're right. It's red like inside the RSX, but not as bright, even with the dimmer all the way up (or down or whatever)

Next I gotta make the HVAC stuff match. I don't say A/C as I have no A/C. There is an OEM plate where the A/C switch would be.

I'll try the camera again next time it's dark.
B

 

Whats the bright spot? reflection from the plastic to the camera?

 

airbag warning light...

 

you should just set the camera on top of the horn with the timer on so you dont have to hold the camera still. is it me or do the guages look purplish? On my EK all i did was change the bulbs from clear ones to amber ones, and vualah i have amber cluster

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JamesV &raquo;</TD></TR><TR><TD CLASS="quote">nice now do the heater / ac part!</TD></TR></TABLE>

That thing is a bitch to get out, I hated it.

This belongs in the Appearance/Cosmetic forum.

 

edit

 

looks good, but yea i would have just dont the clear to amber light bulb swap, but its cool though, kinda looks like an sir cluster

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lifeofbean &raquo;</TD></TR><TR><TD CLASS="quote">airbag warning light...</TD></TR></TABLE>

Yes this is one of my next missions. That thing is so annoying. The previous owner taped a piece of paper infront of it or something. Gotta handle that.
B

 

Looks like it works out fine

 

looks cool