Is there an easy way to convert from 4x100 to say 4x114.5 with just a bolt on spacer or something easy like that? Are there spacers that convert your current bolt pattern to a different one? I searched and I only found a couple things and really need some help.

Here is the set of wheels I am picking up, Enkei Apche V's, I have allways wanted them and got a good deal on them. If I can't use them on my car then I am going to clean them up and sell them for a profit. So either way it's a win win situation... Here is a picture of one of them, selller says they are 4x114.5 and came off an rx-7...



Thank for the help in advance.

 

P.S. is 4x4.50 the same as 4.114.5 because I have no idea and I hate when they don't use metric measurments on this **** online.

 

bump...

 

bring them to a machine shop and have them redrilled to 4 x 100 as you can cee theres room on the rims to do it

 

If you were talkin 4x114.3, then you can pull your civic hubs out and put in some 4x114.3 hubs.

But...come on. Holy crap those rims are ugly, just stick with your stock wheel covers. If ya wanna sell em, no one is going to buy those rims, there like from the 80s and in very low demand except to some rogue enthusiast.

 

mesh rims..

mmm. gooood

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redline96LX &raquo;</TD></TR><TR><TD CLASS="quote">If you were talkin 4x114.3, then you can pull your civic hubs out and put in some 4x114.3 hubs.

But...come on. Holy crap those rims are ugly, just stick with your stock wheel covers. If ya wanna sell em, no one is going to buy those rims, there like from the 80s and in very low demand except to some rogue enthusiast.</TD></TR></TABLE>


well sense this is the tech section and not the a/c section then whether not there ugly to you really shouldnt matter
p.s. not trying to flame

homboy has those same rims on his 91 accord hes been looking for them for a long time

 

Redline96LX you are pretty ignorant, there is a large market for these wheels, also I enjoy working on projects like these, hence why I work on my car. Next time keep the stupid flame attempts to yourself...thanks.

Do you guys think that I will have enough room to redrill? Do you think it will crowd that center part that juts out where the center caps go? I don't want it to look like a hack job is all, I plan on filling in the old holes also if it is possible to redrill. Thanks for the help so far.

 

see if they redrill em in those empty slots.

universal 4 lug y0!

 

at the warehouse i used to work at we had about 50 of these rims that we got from front clips and we couldnt get rid of them

 

Every time I searched on Ebay for them, they would get bid on like none other...allways got out of my price range...maybe Ebay is the way to go.