1st off sorry i dont have pics(yet, but i dont know how to post pics) im doing a dx to obd-1 conversion....bought a harness from rywire and i already plugged in the harness but i have some problems(some left over/missing wires) so i know this might be pretty vague but i need help can anyone tell me what these wires go to??


1) 5 wires (next to the 14-pin plug on pass side)

blue w/white
blue w/yellow
green w/black
black
blue

2) 4 wires (square plug) they came out of the same loom as the map sensor wires

black
black w/yellow
blue
green

3) im looking for the male side(the side coming from the car not the harness) of the round 8-pin plug (this is the colors from the rywire side)
blue w/yellow
red
yellow w/black
yellow
yellow
white
yellow w/green
green

4) i need to find the wires that run to a solonoid (on the back of the intake manifold) it's a 2 pin sensor (i need to know which wires)

i have more but i will update thanks for any help


Modified by hatchinprogress at 4:34 PM 12/30/2005

 

help

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatchinprogress &raquo;</TD></TR><TR><TD CLASS="quote">help</TD></TR></TABLE>ttt

 

bump for some help.....c'mon where are all the wire experts at????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatchinprogress &raquo;</TD></TR><TR><TD CLASS="quote">bump for some help.....c'mon where are all the wire experts at????</TD></TR></TABLE> help me get my car running

 

it's hard to tell what any of those plugs are or go to. The wire colors don't really follow OEM. Pics would really help. There is alot that needs to be converted on you're DX harness in order to make it work on a ODB1 engine, it's a little more extensive than just a distributor adapter. Post up some pics and i'll see if i can help you out.

-Dan @ HASport