b18b1 - je pistons 9.2:1 - eagle hp rods (3/8's arp rod bolts) - knifed crank - 950$ - GE ls/vtec ki
Thread Starter
Honda-Tech Member
Joined: May 2003
Posts: 1,155
Likes: 0
From: DC Metro
b18b1 - je pistons 9.2:1 - eagle hp rods (3/8's arp rod bolts) - knifed crank - 950$ - GE ls/vtec ki
I put this together while i was building my c5 block. Its about done so i pulled this out and now its for sale.
- b18b1 3k on build
- OEM bearings, oil pump (3k)
- race engineering block gaurd, installed before they milled the surface, spot welded
- je pistons 9.2:1
- eagle rods with 3/8 arp rod bolts
- Golden Eagle LS/Vtec conversion (no dowel pins)
Motor ran great, it was boosted for about 600miles before i sold my Greddy kit, then tore this down (so i could send out my head)
950$ shipped. Very firm.
I wiped off the #1 cylinder with seafom
- b18b1 3k on build
- OEM bearings, oil pump (3k)
- race engineering block gaurd, installed before they milled the surface, spot welded
- je pistons 9.2:1
- eagle rods with 3/8 arp rod bolts
- Golden Eagle LS/Vtec conversion (no dowel pins)
Motor ran great, it was boosted for about 600miles before i sold my Greddy kit, then tore this down (so i could send out my head)
950$ shipped. Very firm.
I wiped off the #1 cylinder with seafom
Thread
Thread Starter
Forum
Replies
Last Post
beyondstock
Classifieds: Forced Induction
3
Mar 13, 2009 05:26 AM
