Whats the difference between each sized throttle bodies and what sized throttle body should i get? I am getting a skunk 2 throttle body and skunk 2 IM... i just want a perfect fit for a 95 jdm h22a without any extra things to do to fit the throttle body...

 

Dont forget the hondata inlet manifold gasket to
cant beat skunk 2 its the best on the market man

 

IIRC, the S2 IM has a 64mm opening, same as the stock throttle body. If you buy a S2 TB that is larger than 64mm you will have to have the opening of the S2 IM ported to match.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jake_Sale &raquo;</TD></TR><TR><TD CLASS="quote">
cant beat skunk 2 its the best on the market man</TD></TR></TABLE>
PWHAHAHAAHA!!! oh man thanks i needed a good laugh..

but anyway your stock throttle body whether it be jdm or usdm will bolt up just fine.. unless you get into high boosted #s or serious n/a #s a stock TB will be fine.

 

Actually the S2K TB has a 66mm inlet while the H22 has a 64mm. I had my S2K TB P + P to 69mm... The most you can get out of an H22 TB is 66mm.

Keith