Nikozai's Gunmetal 1990 B16 CRX w/mugen kit. Clean - Reno NV, Bay Area, CA
SOLD it
Thanks to all
The original post on NCCC: http://www.norcalcrx.org/forum...=1148
Yeah.. i'm getting another and starting fresh. (can't sell it without getting another. you know)
This CRX is located in San Jose, CA
The engine has roughly 90,000 miles on it. (30k import est. + 60k the past 8 years)
The engine is a B16 converted to OBD1 running a chipped P28 (Kenjis allmotor program)
Nothing has been done internally, just I/H/E. Nice crusing CRX.
Checkout that gallery people
http://www.norcalcrx.org/gallery/Nikozai/
July 05

Oct. 04

The good:
- Reapolstered Seats, door panels, rear box and trunk cover.
- B16a running a OBD1 Chipped P28
- Greddy SP2 Cat back w/ dual tips to look more stock. (Looks hot)
- DC 4-2-1 Header
- Jimfab x-member
- Nice suspension, nothing crazy, just nice springs and a good set of struts.
- Tinted windows. I think its 25/35. (not pictured)
- JDM rear tails
- JDM Power windows, center mounted switches.
- Power locks (and trunk)
Several security measures have been taken to fight theft.
The ambiguous:
- Valve cover and intake pipe have been sprayed to match the car. Looks nice.
- rear mounted battery
- generic intake
- 17 inch rims
- at least 75% tread on all tires
- Gunmetal paint has small chips on corners, some orange peel but it's hard to see it with gunmetal paint. From 10 feet it looks cherry.
UPDATE: THE PAINT LOOKS PERFECT NOW!!!
Got it professionally buffed and waxed, there's nothing wrong with it now! Looks like a new car!!
The bad:
- JDM intake manifold, you'll need a USDM one for smog in CA (along with a US P30)
- Dent in oil pan (doesn't effect a thing, doesn't leak, oil pump works perfectly, been there forever)
- No more Jackball as featured in the pic...
Before you buy:
DONE - The CRX is going into a professional detailer this week (11/14)
DONE - New Bumper lights are being installed since those old ones are faded.
DONE - Just got some new rubber, all 4 tires have over 70% tread on them.
READY TO BE SOLD!!
Price is $3900
It's registered in Nevada, To pass BAR in California you'll need 3 things, all of which i can help you with.
USDM P30 ECU (Can get one rented for $50-$75 for you to BAR with)
USDM Intake Manifold or Skunk2 w/CARB Sticker (Ebay is your friend.... Not expensive atall)
A different intake pipe. (probably have one to lend ya when the time comes)
The Interior - Reapholstered Vinyl, no spray paint here. (Pre-Tinting)

The front seats & door panels, note - Dash is not the same as pictured now. This is a pic from the old chassis.
Modified by NikoZai at 7:29 PM 11/22/2005
Modified by NikoZai at 6:36 PM 11/23/2005
Thanks to allThe original post on NCCC: http://www.norcalcrx.org/forum...=1148
Yeah.. i'm getting another and starting fresh. (can't sell it without getting another. you know)
This CRX is located in San Jose, CA
The engine has roughly 90,000 miles on it. (30k import est. + 60k the past 8 years)
The engine is a B16 converted to OBD1 running a chipped P28 (Kenjis allmotor program)
Nothing has been done internally, just I/H/E. Nice crusing CRX.
Checkout that gallery people

http://www.norcalcrx.org/gallery/Nikozai/
July 05

Oct. 04

The good:
- Reapolstered Seats, door panels, rear box and trunk cover.
- B16a running a OBD1 Chipped P28
- Greddy SP2 Cat back w/ dual tips to look more stock. (Looks hot)
- DC 4-2-1 Header
- Jimfab x-member
- Nice suspension, nothing crazy, just nice springs and a good set of struts.
- Tinted windows. I think its 25/35. (not pictured)
- JDM rear tails
- JDM Power windows, center mounted switches.
- Power locks (and trunk)
Several security measures have been taken to fight theft.
The ambiguous:
- Valve cover and intake pipe have been sprayed to match the car. Looks nice.
- rear mounted battery
- generic intake
- 17 inch rims
- at least 75% tread on all tires
- Gunmetal paint has small chips on corners, some orange peel but it's hard to see it with gunmetal paint. From 10 feet it looks cherry.
UPDATE: THE PAINT LOOKS PERFECT NOW!!!
Got it professionally buffed and waxed, there's nothing wrong with it now! Looks like a new car!!
The bad:
- JDM intake manifold, you'll need a USDM one for smog in CA (along with a US P30)
- Dent in oil pan (doesn't effect a thing, doesn't leak, oil pump works perfectly, been there forever)
- No more Jackball as featured in the pic...

Before you buy:
DONE - The CRX is going into a professional detailer this week (11/14)
DONE - New Bumper lights are being installed since those old ones are faded.
DONE - Just got some new rubber, all 4 tires have over 70% tread on them.
READY TO BE SOLD!!
Price is $3900
It's registered in Nevada, To pass BAR in California you'll need 3 things, all of which i can help you with.
USDM P30 ECU (Can get one rented for $50-$75 for you to BAR with)
USDM Intake Manifold or Skunk2 w/CARB Sticker (Ebay is your friend.... Not expensive atall)
A different intake pipe. (probably have one to lend ya when the time comes)
The Interior - Reapholstered Vinyl, no spray paint here. (Pre-Tinting)

The front seats & door panels, note - Dash is not the same as pictured now. This is a pic from the old chassis.
Modified by NikoZai at 7:29 PM 11/22/2005
Modified by NikoZai at 6:36 PM 11/23/2005
bumpity
haha I'll trade cash plus a local 88 CRX HF only (preferably shell, no glamor mods), So if someone's sick of their project CRX and wants one that actually drives nice
that would work.
Thanks for the bump
that would work. Thanks for the bump
BumpI made the mistake of posting a picture and links on Craigslist... people just see the picture and say "i want to buy it" and proceed to ask questions like "are there any aftermarket products on the car?" LOL
bump
bump - i'm so putting it on ebay.
Trending Topics
damn, id totally get this off you if i had the $ right now. might have it in a few weeks, but bump for a nice rex !
damn my arms are hairy LOL buyin a CRX from a freakin sasquatch.
Yeah, just put new bumper lights in, black housing. Look so niiiiiice.
I was cutting the old ones out because I had screws in the rear of them and i didn't want to take the whole bumper off. They weren't normal CRX ones, now they are.
Got a few offers, people are lookin at it next week.
Hey, i can ship the car to you for 4500.
If you have a $5000 credit limit i can even process your credit card over the phone LOL
Yeah, just put new bumper lights in, black housing. Look so niiiiiice.
I was cutting the old ones out because I had screws in the rear of them and i didn't want to take the whole bumper off. They weren't normal CRX ones, now they are.
Got a few offers, people are lookin at it next week.
Hey, i can ship the car to you for 4500.
If you have a $5000 credit limit i can even process your credit card over the phone LOL
bmup
thanks!!
I got it professionally detailed today with a buffing and wax job. It looks amazing, i've never seen it look this good. There's nothing wrong with the paint now!!!
I got it professionally detailed today with a buffing and wax job. It looks amazing, i've never seen it look this good. There's nothing wrong with the paint now!!!
Sorry, if you want it that bad you're going to have to come all the way.
I won't let someone drive that far without a crap load of info about it and tons of pics / video though.
I've got people coming to look at it, if for some reason i still have it in 2 weeks, i'll take some video of driving it, hella pics of it all around, every corner. Then I'll put it on Ebay
I won't let someone drive that far without a crap load of info about it and tons of pics / video though.
I've got people coming to look at it, if for some reason i still have it in 2 weeks, i'll take some video of driving it, hella pics of it all around, every corner. Then I'll put it on Ebay

SOLD SOLD SOLD
Thread
Thread Starter
Forum
Replies
Last Post
91crx_829
Honda CRX / EF Civic (1988 - 1991)
1
Mar 16, 2010 04:23 AM
NikoZai
Vehicles for sale
25
Oct 15, 2004 08:27 PM




