Bearings and headgasket for boost? H22a
Thread Starter
Honda-Tech Member
Joined: Mar 2003
Posts: 1,627
Likes: 0
From: London, UK, UK
Bearings and headgasket for boost? H22a
My engine builder uses ACL bearings whereas I know alot of people use the Honda bearings, which is recommended?
Also I have been tempted by a Cometic headgasket but notice alot of people on here use the OEM headgasket?
This is for a boosted h22a engine, please advise
Thanks in advance
Also I have been tempted by a Cometic headgasket but notice alot of people on here use the OEM headgasket?
This is for a boosted h22a engine, please advise
Thanks in advance
Senior Member
Joined: Nov 2003
Posts: 5,167
Likes: 1
From: baxter, tn, usa
Re: Bearings and headgasket for boost? H22a (djnikko)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by djnikko »</TD></TR><TR><TD CLASS="quote">My engine builder uses ACL bearings whereas I know alot of people use the Honda bearings, which is recommended?
Also I have been tempted by a Cometic headgasket but notice alot of people on here use the OEM headgasket?
This is for a boosted h22a engine, please advise
Thanks in advance </TD></TR></TABLE>
dan benson uses acl's.......the only diffrence is.the oem bearings let
you play...i think it is .0003 of one another.
oem head gasket will work fine...but i would spray a couple of coats
each side for some added protection.
harv
Also I have been tempted by a Cometic headgasket but notice alot of people on here use the OEM headgasket?
This is for a boosted h22a engine, please advise
Thanks in advance
</TD></TR></TABLE>dan benson uses acl's.......the only diffrence is.the oem bearings let
you play...i think it is .0003 of one another.
oem head gasket will work fine...but i would spray a couple of coats
each side for some added protection.
harv
Joined: Jun 2005
Posts: 374
Likes: 0
From: Ventura, Ca, USA
Re: Bearings and headgasket for boost? H22a (1700anddroping)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1700anddroping »</TD></TR><TR><TD CLASS="quote">replied.</TD></TR></TABLE>
and i would listen to him. i was gonna say the same thing.. but he took the words out of my mouth .. by the way how's the project going (1700anddrpng)
and i would listen to him. i was gonna say the same thing.. but he took the words out of my mouth .. by the way how's the project going (1700anddrpng)
Trending Topics
Joined: Jun 2005
Posts: 374
Likes: 0
From: Ventura, Ca, USA
Re: Bearings and headgasket for boost? H22a (PRELUDE-GT35R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PRELUDE-GT35R »</TD></TR><TR><TD CLASS="quote">Do not use ACL bearings unless you are DRAG RACE. You'll fine a article in here wrote by EARL. Hope that will help.</TD></TR></TABLE>
correction.. do not use ACL "RACE" bearings unless u are dedicated drag car
correction.. do not use ACL "RACE" bearings unless u are dedicated drag car
Senior Member
Joined: Nov 2003
Posts: 5,167
Likes: 1
From: baxter, tn, usa
Re: Bearings and headgasket for boost? H22a (jmcmil6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jmcmil6 »</TD></TR><TR><TD CLASS="quote">
correction.. do not use ACL "RACE" bearings unless u are dedicated drag car </TD></TR></TABLE>
sorry guys forgot to put that.
the project is still rolling along.i have pics posted of the mock up on here.
harv
correction.. do not use ACL "RACE" bearings unless u are dedicated drag car
</TD></TR></TABLE>sorry guys forgot to put that.
the project is still rolling along.i have pics posted of the mock up on here.
harv
Thread
Thread Starter
Forum
Replies
Last Post