i just got done sawping my motor into my 91 hatch..i started the car, n their was no fuel, plus the light from the ecu wasnt blanking when u turn on the key to the red lights..i check the ecu fuse n it was good, nothing was wrong..anybody have any suggestion plz help meeh..thanks

 

Check all your wiring connections, and if you changed out the ECU, check them too. Then check your main relay, its more then likely one of the above.

Blaze

 

Check your grounds too, very important, especially the one at the T-stat housing.

 

Check the grounding on the battery.

 

where is the T-stat housing..