Looking to buy a NEW Exhaust for my CRX. Going boost and I just wanted some first hand experiences with turbo applications. I wanted Greddy Sp. What Exhaust are you running on your turbo EF?

 

Many people have their own pipes custom made for their setup, ie custom 3 incher pipes & seperate dumptubes etc

 

thats what i was thinking but i want a stock/looking exhaust(cops)

 

You can save your rear muffler section and leave it attached to your CRX, yet have the 3 inch (or whatever) pipe hooked up as well. I have seen several people do this it seems to work out well for them...

 

https://honda-tech.com/zerothread?id=1340434

GReddy SP2

 

Use your stock exhausts and run an "e-cutout" or exhaust cutout.

 

this year i ran the dynomax ultraflow and count be happier...very quiet and worked

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueShadow &raquo;</TD></TR><TR><TD CLASS="quote">Use your stock exhausts and run an "e-cutout" or exhaust cutout.</TD></TR></TABLE>The 1.75 inch stock exhaust won't choke it to death with the e-cutout closed?

 

OK whats the biggest piping for a crx exhaust with a stock looking hanging muffler?

 

I have charge pipes for ya, with an Apexi bov. I could also include the ic

 

custom 3" is ****..

 

Thermal R+D Ownes!! But i also have a custom 3in. with a magnaflow muffler. Great sound!

Which is for sale!

 

buddy club spec II

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jnbhonda &raquo;</TD></TR><TR><TD CLASS="quote">Thermal R+D Ownes!! But i also have a custom 3in. with a magnaflow muffler. Great sound!

Which is for sale!</TD></TR></TABLE>

pics of the exhaust for sale?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beyondspecs_jamar &raquo;</TD></TR><TR><TD CLASS="quote">

pics of the exhaust for sale?</TD></TR></TABLE>


https://honda-tech.com/zerothread?id=1383093

 

thermal

 

anyone know someone selling a used but in good condition thermal?.......... it seems that my best choice..... other than custom

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18_crx &raquo;</TD></TR><TR><TD CLASS="quote">anyone know someone selling a used but in good condition thermal?.......... it seems that my best choice..... other than custom</TD></TR></TABLE>

Good luck on that 1

 

screw that spendy ****, go with kteller, they have full kits for dirt cheap. I got my 3" for 225 shipped, and my dynomaz super turbo muffler makes it quiet as hell. I made a thread about it not too long ago, theres a couple pics

and the dynomax mufflers look stock, except for the pipe is 3" and not 1.75

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18cEF9 &raquo;</TD></TR><TR><TD CLASS="quote">screw that spendy ****, go with kteller, they have full kits for dirt cheap. I got my 3" for 225 shipped, and my dynomaz super turbo muffler makes it quiet as hell. I made a thread about it not too long ago, theres a couple pics

and the dynomax mufflers look stock, except for the pipe is 3" and not 1.75
</TD></TR></TABLE>

In addition to the $225 dont forget the $75 for the 3" oval muffler and a few bucks more if you want a nice tip. Also the Kteller piping kit doesn't have a resonator so if you want to add one it'll be another $65. Welding all that stuff up will be anywhere between $50-$150. And shipping isn't cheap either, cause IIRC it cost me around $50-$60 for shipping.

 

ya kteller is great but unless u have a welding machine its going to come out costing the same.

 

thermal r&d 3"



http://www.full-race.com/catal...d=190

 

blueshadow-

wtf are you talking about? i got my full exhaust for about 300 bucks. 50 bucks for the muffler, super turbo 3". exhaust tip? who wants those? it will make your exhaust look like some riced witha friggin huge at 5" tip on a stock exhaust. 3" ehaust no cat or resonator with a super turbo muffler, sounds stock except for the turbo spool. you can also get stainless steal for 50 bucks more shipped.

THE SHIPPING FOR THE EXHAUST WAS A WHOLE 25 BUCKS, DAMN THAT SURE IS SPENDY

 

just go with the thermal 3" it sits like the stock exhaust, and sounds mean

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18cEF9 &raquo;</TD></TR><TR><TD CLASS="quote">blueshadow-

wtf are you talking about? i got my full exhaust for about 300 bucks. 50 bucks for the muffler, super turbo 3". exhaust tip? who wants those? it will make your exhaust look like some riced witha friggin huge at 5" tip on a stock exhaust. 3" ehaust no cat or resonator with a super turbo muffler, sounds stock except for the turbo spool. you can also get stainless steal for 50 bucks more shipped.

THE SHIPPING FOR THE EXHAUST WAS A WHOLE 25 BUCKS, DAMN THAT SURE IS SPENDY
</TD></TR></TABLE>

Did you read the rest of my post you little wise ***? all those little parts dont cost much. But the LABOR costs for WELDING UP THE EXHAUST, will cost you a lot more. Depending on where you go and the quality of the welds you want it can cost anywhere between $50-$150 to have all the stuff welded up.

And all that **** you just now posted is basically just repeating what I said. I didn't see you mention any of that in your previous post. There are people out there that want to run a resonator, or a different muffler then the one you bought, or want it to have a nice tip, or want to get a better quality weld then what you got, or may have to pay more for shipping then you did.