Okay, so I needed a replacement trunk & I'm doing a full Si conversion on my 97 DX, So thanks to one of my friends here on Honda-Tech I picked up a nice trunk from a 00 Si. Well, I have it all bolted up, Si trunk, Si bumper. So.. now I'm left with the wire harness which was cut on the Si trunk, & my wire harness.. so I did the obvious easier thing, I cut the wires from each so I could crimp the wires, then cover with loom. Well, to my surprise there are around 6 wires on the Si trunk harness & about 16 on the DX harness, on my DX harness I have doubles of many of the same wires, I'm confused & without a multimeter to dare try testing any of them. Anyone done this swap, or anyone have any insight what so ever? Thanks.

 

pics would help

 

No digital camera right now, so I'm hoping someone else has attempted this swap.

 

got it figured out, if anyone needs help with it, pm me.