just got my fast-turbo oil line kit
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 4,721
Likes: 2
From: morgantown, wv, usa
just got my fast-turbo oil line kit
i was test fitting parts on my oil line kit i got from Flamenco-T.
Is it suppose to be hard as hell to tighten up after the first turn on the Drain Flange on the <U>TURBO</U> with the 45degree adapters .
Is it suppose to be hard as hell to tighten up after the first turn on the Drain Flange on the <U>TURBO</U> with the 45degree adapters .
Honda-Tech Member
Joined: Feb 2001
Posts: 6,351
Likes: 0
From: Tejas
Re: just got my fast-turbo oil line kit (komat)
The adapter is an NPT thread, which stands for National Pipe Tapered. The threads are tapered and it goes widerr as it get closer the center.
You'll only need to thread in about 75% of the threads into the drian flange and it will seal perfectly. Remember to put a few layers of teflon tape and you'll be good to go.
stan
You'll only need to thread in about 75% of the threads into the drian flange and it will seal perfectly. Remember to put a few layers of teflon tape and you'll be good to go.
stan
Thread
Thread Starter
Forum
Replies
Last Post
