FS> B-Series Greddy turbo manifold, turbo, 3 inch downpipe, oil feed line
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 3,107
Likes: 0
From: CT
FS> B-Series Greddy turbo manifold, turbo, 3 inch downpipe, oil feed line
I had this kit on my Integra LS for about 5000 miles until i decided to switch to a new set-up. The manifold is in great condition,nothing wrong with it. The turbo is also is good condition, it have a little bit of shaft play but nothing to worry about. The downpipe still uses the stock elbow > 2.5 >3 inch pipe. The oil feed line for the turbo is also included. The turbo and manifold is missing a bolt here and there but those can be find at any store like ace, home depot, lowe etc...
The flex pipe is scratch but nothing is bend in, it work comepletely fine.
Im asking 600 or OBO for the whole thing,might part it if needed...
BTW, this downpipe will bolt right up to a thermal 3 inch turbo back since that what i had...
The flex pipe is scratch but nothing is bend in, it work comepletely fine.
Im asking 600 or OBO for the whole thing,might part it if needed...
BTW, this downpipe will bolt right up to a thermal 3 inch turbo back since that what i had...
476 whp / 323 tq @ 17 PSI
iTrader: (6)
Joined: Feb 2005
Posts: 6,990
Likes: 0
From: Southern California
Re: FS> B-Series Greddy turbo manifold, turbo, 3 inch downpipe, oil feed line (StolenTeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StolenTeg »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
PMed for downpipe w/o cast elbow
</TD></TR></TABLE>PMed for downpipe w/o cast elbow
Thread
Thread Starter
Forum
Replies
Last Post
StolenTeg
Classifieds: Forced Induction
20
Sep 29, 2005 03:58 PM
