I just put my Neuspeed Sport springs on and my camber is about 1.5 degrees off. Do you think this is enough to need a camber kit? Whats the wear time on this difference of camber settings?

 

I would get one. I had those same springs on my old civic and the front tires definetly wore faster than my rear ( the rear had a homemade camber kit) I had the rears for about 8 months with plenty (60-70%) of tread left; and the fronts went bald inside then I flipped them and they were done for in that same amount of time. Tires: Dunlop SP8000

 

yeah get it

there cheaper than tires!

 

1.5 degrees negative camber is not bad. Make sure your toe settings are within spec. As long as you don't have more than 2 degrees negative, you'll be fine. Mine is at 2 degrees and I've been rotating tires every 2 oil changes. No problems whatsoever with tire wear.