check out my slip

60 ft 2.4
330ft 6.091
1/8th 8.935
mph 85
1000ft 11.405
1/4 et 13.485
mph 109.6

i preloaded at about 5000 spun out of the hole a bit caught traction, tapped the nitrous button once spun more pegged 8000 rpms once it caught and climbed to 8500 i shifted to 2nd and held the button down, which felt like it was on the verge of spinning too much but was still grabbing. Third came up and then 4th which felt really smooth.

set up
92 eg cx
on azenis
stock usdm type r motor
chipped ecu I/H/E and 75 shot nitrous

now i think something is wrong with the car, we had ran it previously on the motor and on baby slicks it ran a 14.2 with pretty much the same traction issue out the hole. i think it should be runing faster what are your opinions

 

60 foot is really bad, try focusing on slick tire pressure and burn out. and stay off the nitrous in first gear

 

was your eg white? haha if so my friend were the ones buying you beer...hahaha

 

naw that wasnt us we were in the red eg. we had 2 other cars a black rex and a red em1

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mr john &raquo;</TD></TR><TR><TD CLASS="quote">60 foot is really bad, try focusing on slick tire pressure and burn out. and stay off the nitrous in first gear </TD></TR></TABLE>
yea that was just a practice run to see how the track prep was. plus the azenis were already bald lol. the next time ill be on slicks hoping to drop down to a 1.9 60ft. and hopefully get into the 12's