B18C1 bore 20 over
CP 9:1 pistons
Eagle H beam rods, ARP bolts
Federal Mogul bearing kit

T3/T04E ~ 57 Trim Garrett Turbo (50/63 A/R) T3/T4
Revhard manifold with Swaintech coating
Tial wastegate, 5&10psi spring.
Greddy Type S BOV
Modine IC with custom endtanks
3" custom DP with 3" exhaust (Kteller) 3'' flex, and 3'' magnaflow
Walbro 255 pump
450 blue tops
3bar Map

Show me what u got guys, the setup is good for over 400 hp with some bigger injectors

 

up

 

Nice change of plans. I never thought of doing it this way. Since we last spoke of this, I picked up a B16A2, B18B1 and a B18C1. all in good shape and running. Lets talk about this.

 

ok lets talk

 

Here are a few pics of my G20 before I finished it/finish it. In the pics its dirty and no clear coat.
95 G20 before all the paint

The top of the car is 99 Accord black and on the hood

I polished the motor, block, valve cover and intake manifold.

Got alot of NISMO stuff, res covers, oil cap, rad cap.

The back is badged PRIMERA and the front clip is all NISSAN not INFINITI.

The back PRIMERA badge
[IMG][http://www.tmobilepictures.com/photo...p47cs65xs/IMG]
The Ferrari goes with it

It has a stock front bumper now. It is all finished outside, now I will get some pics inside soon.
Stay close, Im taking some pics of my motors.

 

Pmed

 

Heres the motors
The B16A2 tossed a rod out the block. I had it repaired and it is good as new.


The B17A is a good motor, all stock

B18A1 is fresh rebuilt w/0 miles. It is so clean, it glows in the dark. I have a powder that glows and I sprayed it on the motor. Its violet purple.

The B18B1 had a spun rod so I had the crank worked over and chromed. The rods are cryo treated, pistons are swain, poly and oil sheilded.

The B18C1 broke a rod so I got Type R rods and pistons and cams. It is also crtoed, swained, poly and oil sheilded. It has titanium valves and retainers and dual springs. It is being port and polished as we speak. Everything has been cleaned at Honda. A good friend works at the service shop.
All the heads are at Honda right now being inspected, a few valves and a little flattening.

B16 motor



B17A motor


LS motor

[IMG][http://www.tmobilepictures.com/photo...9s5otcio9/IMG]

GSR motor


Heres the GSR head


I will be getting the heads back on Tuesday, I will get them to you.
Let me know what you are thinking.

 

so what would u want to trade for my turbo motor? would u want the whole car for all that crap im confused?

 

CRAP?? Here we go again. What do you want, simply letting you know what I got. The only pic I didnt send you was my t-3/super-60 w/ball bearing center section.
What do you want?? I got about everything you need. Cash?? Motors?? Name it, let me know chief, Ill make it happen.

 

You got any pics of your stuff??

 

bump

 

not selling the motor separate any more entire car is for sale sorry guys