Ignition Break up after turbo install
Thread Starter
Joined: May 2005
Posts: 8
Likes: 0
From: Mrytle Beach, SC, USA
Ignition Break up after turbo install
Here it is I finally put my kit on and I'm impressed for just 7-9 lbs. Here's my setup
T3/to4E
P28 chipped(Chrome chip and uberdata chip, running the chrome chip now)
Vafc(Not in use until dyno tune)
Rc 440's
Holley walbro 255lph
Ngk Brk7e Two steps colder
Gap 0.030
3'' turbo back
Everything was going great for te the first day or so. But the I was showing a friend what the car felt like, and I boosted twice and as at like 5500(Vtec)-6500rpms it kind of sputtered and cut off. I could not crank it again. We found out it was the coil. Changed the coil and started driving and same thing happened. Poof! smoking coil. I got smart(or so I thoght) and purchased a MSD 6A ignition box, Accel Spark coil, and a 95 prelude Dizzy cap.
Now it fires up quicker and revs better, feels like more power but starts to break up under bosst over 5500rpms. Has anyone had similar experiences or am I missing something. Pls help i'm going to the dyno Saturday
T3/to4E
P28 chipped(Chrome chip and uberdata chip, running the chrome chip now)
Vafc(Not in use until dyno tune)
Rc 440's
Holley walbro 255lph
Ngk Brk7e Two steps colder
Gap 0.030
3'' turbo back
Everything was going great for te the first day or so. But the I was showing a friend what the car felt like, and I boosted twice and as at like 5500(Vtec)-6500rpms it kind of sputtered and cut off. I could not crank it again. We found out it was the coil. Changed the coil and started driving and same thing happened. Poof! smoking coil. I got smart(or so I thoght) and purchased a MSD 6A ignition box, Accel Spark coil, and a 95 prelude Dizzy cap.
Now it fires up quicker and revs better, feels like more power but starts to break up under bosst over 5500rpms. Has anyone had similar experiences or am I missing something. Pls help i'm going to the dyno Saturday
Honda-Tech Member
Joined: Apr 2002
Posts: 7,574
Likes: 6
From: Cincinnati,, Oh
Re: Ignition Break up after turbo install (1badEk9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1badEk9 »</TD></TR><TR><TD CLASS="quote">starts to break up under bosst over 5500rpms. </TD></TR></TABLE>
Hows your airfuel ratio? Is the ignition timing set to a reasonable level?
Hows your airfuel ratio? Is the ignition timing set to a reasonable level?
Thread
Thread Starter
Forum
Replies
Last Post
datspeed77
Tech / Misc
2
Jun 20, 2002 08:49 AM
