Rod torque on a stock b18c1 bottom end
Thread Starter
Junior Member
Joined: Sep 2005
Posts: 820
Likes: 0
From: Dont You Just Love Lynn Cops, Boston MA, USMA
Rod torque on a stock b18c1 bottom end
i have a quection, im working on a stock b18c1 bottom end. I need help with the piston rods thats connected to the crank because i dont know the tourque range to tighting them. i heard you can spin bearings if you dont do it right. thanks alot if you help me
Junior Member
Joined: Nov 2002
Posts: 618
Likes: 0
From: Bmore, MD
Re: Rod torque on a stock b18c1 bottom end (phyz)
Honda-Tech Member
Joined: Sep 2005
Posts: 2,296
Likes: 2
Re: Rod torque on a stock b18c1 bottom end (AnthraxVX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AnthraxVX »</TD></TR><TR><TD CLASS="quote">definitly not. its 19-25 for rod caps</TD></TR></TABLE>
Trust me. I have a factory service manual right in front of me.
Trust me. I have a factory service manual right in front of me.
Trending Topics
Daisy... Daisy...
Joined: Jun 2004
Posts: 16,580
Likes: 4
From: 24601
Re: Rod torque on a stock b18c1 bottom end (AnthraxVX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sleeper Style »</TD></TR><TR><TD CLASS="quote">33 ft/lbs on a stock B18C1.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AnthraxVX »</TD></TR><TR><TD CLASS="quote">definitly not. its 19-25 for rod caps</TD></TR></TABLE>
Why would you bump an 8 month old thread for this?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AnthraxVX »</TD></TR><TR><TD CLASS="quote">definitly not. its 19-25 for rod caps</TD></TR></TABLE>
Why would you bump an 8 month old thread for this?
Honda-Tech Member
Joined: Feb 2006
Posts: 368
Likes: 0
From: San Diego, CA, USA
Re: Rod torque on a stock b18c1 bottom end (Dogginator)
i didnt realize it was 8 months old 
. but ok so its 33, **** cuz i did mine for 25, cuz im rebuilding my shiz. that is lame that my manual would say 19-25. now i have to take apart my bottom end to fix it. thx for the info sorry about the bs.
. but ok so its 33, **** cuz i did mine for 25, cuz im rebuilding my shiz. that is lame that my manual would say 19-25. now i have to take apart my bottom end to fix it. thx for the info sorry about the bs.
Thread
Thread Starter
Forum
Replies
Last Post
