UPDATE: on my full interior pump gas built turbo four door
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 9,673
Likes: 0
From: driving a wolf in sheeps skin in, NY
UPDATE: on my full interior pump gas built turbo four door
update from: https://honda-tech.com/zerothread?id=1328848
60' - 1.734
330'- 4.946
1/8 - 7.424 @ 99.36
1000' - 9.533
1/4 - 11.282 @ 129.55mph
This was my 3rd run with the car, 10psi in 1st gear, 14psi in 2nd, then 18psi in 3rd and 4th. Estimating around 440whp tuned by JDogg. t3/60-1 turbo. Slicks are 24.5x8.5x13 mh's on bogarts (thanks to michael blackwell from http://www.bremotorsports.com for the minty deal on the slicks
) at 8psi. Tranny is b16 w/ quaife lsd. Car is 93 dx 4dr with full interior, exactly how I drive it on the street everyday. z10 traction bars and es mount inserts with stock autozone axles. Launching off the 2step @ 7k building about 7psi of boost.
The run was at Lebanon Valley Dragway in NY. I couldnt get a run in after this one because I dont have a roll cage yet. People say the elevation is much higher than at Englishtown so looking to catch 10's at fall nationals before I get the boot there. This run I was staying into the gas a little harder in between shifts and shifting faster, I still think I can do better though. Especially with some cooler weather, it was very humid and my IAT's were around 180. SO THERES ROOM FOR IMPROVEMENT
Here's the vid: http://media.putfile.com/100_6367 kinda crappy quality but you get the point.
A cooler vid put together by 0x64 thanks
Modified by dunkd at 10:45 PM 9/16/2005
Modified by dunkd at 2:03 AM 9/19/2005
60' - 1.734
330'- 4.946
1/8 - 7.424 @ 99.36
1000' - 9.533
1/4 - 11.282 @ 129.55mph
This was my 3rd run with the car, 10psi in 1st gear, 14psi in 2nd, then 18psi in 3rd and 4th. Estimating around 440whp tuned by JDogg. t3/60-1 turbo. Slicks are 24.5x8.5x13 mh's on bogarts (thanks to michael blackwell from http://www.bremotorsports.com for the minty deal on the slicks
) at 8psi. Tranny is b16 w/ quaife lsd. Car is 93 dx 4dr with full interior, exactly how I drive it on the street everyday. z10 traction bars and es mount inserts with stock autozone axles. Launching off the 2step @ 7k building about 7psi of boost.The run was at Lebanon Valley Dragway in NY. I couldnt get a run in after this one because I dont have a roll cage yet. People say the elevation is much higher than at Englishtown so looking to catch 10's at fall nationals before I get the boot there. This run I was staying into the gas a little harder in between shifts and shifting faster, I still think I can do better though. Especially with some cooler weather, it was very humid and my IAT's were around 180. SO THERES ROOM FOR IMPROVEMENT
Here's the vid: http://media.putfile.com/100_6367 kinda crappy quality but you get the point.
A cooler vid put together by 0x64
thanks Modified by dunkd at 10:45 PM 9/16/2005
Modified by dunkd at 2:03 AM 9/19/2005
Honda-Tech Member
Joined: May 2004
Posts: 1,136
Likes: 0
From: Kansas city
Re: (Okininam)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Okininam »</TD></TR><TR><TD CLASS="quote">it got out of the hole hard though. thats impressive</TD></TR></TABLE>
Hell yea!
Hell yea!
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 9,673
Likes: 0
From: driving a wolf in sheeps skin in, NY
Re: UPDATE: on my full interior pump gas built turbo four door (M.A.R.C.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by M.A.R.C. »</TD></TR><TR><TD CLASS="quote">awesome!!!
what's the displacement on the motor?</TD></TR></TABLE>
84mm bore gsr with stock gsr stroke so its about 1.95L
what's the displacement on the motor?</TD></TR></TABLE>
84mm bore gsr with stock gsr stroke so its about 1.95L
Honda-Tech Member
Joined: Oct 2001
Posts: 6,024
Likes: 0
From: Pembroke Pines, Florida, United States
Re: UPDATE: on my full interior pump gas built turbo four door (dunkd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dunkd »</TD></TR><TR><TD CLASS="quote">84mm bore gsr with stock gsr stroke so its about 1.95L</TD></TR></TABLE>
damn me and my wussy 81.5mm
damn me and my wussy 81.5mm
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 9,673
Likes: 0
From: driving a wolf in sheeps skin in, NY
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 9,673
Likes: 0
From: driving a wolf in sheeps skin in, NY
Re: (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">11.92 @ 129 with a 1.7 sixty foot. I would say the burn out was good enough 
</TD></TR></TABLE>
:cough: 11.28 :cough:
</TD></TR></TABLE>:cough: 11.28 :cough:
Honda-Tech Member
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Re: (dunkd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dunkd »</TD></TR><TR><TD CLASS="quote">
:cough: 11.28 :cough: </TD></TR></TABLE>
:cough: 11.28 :cough: </TD></TR></TABLE>