Who can fab this up for me?

Justin

 

Email me at curleyscustomfab@comcast.net with more details. Round tubing or you want it sqaure? Dimensions?
Thanks, Kyle

 

Where's the breather in the system?

 

This is for my audi project. I would like it made out of round aluminum tubing.

There is no breather neccesary for this system. The two -6 AN ports on the right are for the factory feed and return from the stock fuel system. The -10 AN line on the bottom will feed my Aeromotive A1000, and the -6 AN port on the left will connect to the return port on my FPR.

Justin

 

Justin,
How big of round tubing? What wall thickness? What will the overall length be? How far apart, and where at on the tube, do you want the AN fittings...etc...
Kyle

 

I'd like 3" diameter tubing with ~.083" wall thickness. About 7" tall would be good.

Regards,
Justin

 

I'm going to mock up everything on the car tomorrow and let you know where I'd like the fittings.

Justin

 

Cool, sounds good Justin. Let me know, and I will get you a price...
Kyle
EDIT: Are those male or female AN fittings? If male, and female should be very close in price....the materials alone will be roughly $40. Add $20 on for labor, and you got a deal...let me know