I have a remote start unit, and when finally getting to wiring in the fatty wires that I have put off into now, I noticed how funky the ignition switch is. This is what I'm talking about:

http://www.honda.co.uk/owner/P...0.pdf

It's a '88 Honda Prelude 2.0 Si 4WS. Look at that beast. All I have on my unit is an ACC wire, coil wire, heater/ac wire (that I probably will ignore), and the start wire. I have no idea what I should crimp to what now ... any ideas?

 

Connect the 12V+ constant input, [into the remote start] to the cars white wire, the starter, [output from the R/S] to the cars black/white, the ign., [output from the R/S, that you did not mention] to the cars black/yellow, the acc., [output from the R/S] to the cars yellow, and the acc/heater blower, [output from the R/S] to the cars white/black http://www.bulldogsecurity.com...s.htm 94

 

Dude you are the MAN!

I'm sure I'll have some more questions for ya when I get to work on it tomarrow though! :D

WOO