what guys just wanted to know if anyone has had experience with any of these turbo kits for B-Series/DC2

Thinkin bout makin 450-500 whp...
FAB-WORKs
FULL-RACE
REV-HARD

thanks

I appreciate all the input i can get...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by asefi944 &raquo;</TD></TR><TR><TD CLASS="quote">what guys just wanted to know if anyone has had experience with any of these turbo kits for B-Series/DC2

Thinkin bout makin 450-500 whp...
FAB-WORKs
FULL-RACE
REV-HARD

thanks

I appreciate all the input i can get...</TD></TR></TABLE>

Between those 3 Full Race HANDS DOWN!

 

is that cuz you sell full race or is it a over all better product.... thanks for your input.

 

How deep are your pockets?

 

somewhat deep........ well as you can see i'm parting my car so i can purchase...hopefully the full-race kit...but 3800.00 is alot of cheese.......but i guess if you wanna go fast gotta pay the PRICE.

why you got a better kit in mind...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by asefi944 &raquo;</TD></TR><TR><TD CLASS="quote">is that cuz you sell full race or is it a over all better product.... thanks for your input.</TD></TR></TABLE>


Even if I wasn't a dealer I would say Full Race hands down!!! No doubt seriously! For the longest time I was not a dealer and I ran two of their manifolds previously, people started asking me questions and asking if they could get the product so I chose to carry it. If you notice my product line, I carry no OBX or low quality products IMO. I have seen Rev Hard in person and it is a NICE kit BUT Not AWESOME, I am sorry I don't think I have seen Fab-Works in person but many others I have, Full Race out of those three I still give my opinion.

 

thanks dude.......that helps me alot....cuz i was gonna buy the cheaper kit..ie.(rev hard. etc..).....but i think i want a awesome kit....like you said....thanks again...

 

Fab-Works manifolds are of great quality, thats for sure. Its a newer company so his name really isn't out yet. There are a few people on here that run his products and couldn't be happier. I too am waiting on my manifold, downpipe, dumptube from him and cant wait until I get it. Like I said, it just depends on how deep your pockets are and if you want to spend that kind of cash. Fab-works or Full-race, whichever you go with, Im sure you wont regret it.

 

this is going to get biased review. people have had success with all three. people who have full-race are gonna say get full-race, and people who have fab-works are gonna say fab-works. it all depends on "WHAT U WANT TO CHOOSE".

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flip1199 &raquo;</TD></TR><TR><TD CLASS="quote">this is going to get biased review. people have had success with all three. people who have full-race are gonna say get full-race, and people who have fab-works are gonna say fab-works. it all depends on "WHAT U WANT TO CHOOSE".</TD></TR></TABLE>


OK then my vote is for the OBX full Turbo kit, that is what I got and it is DA BOMB!!! I can even see my reflection in the manifold

 

Full-Race... think about it this way, you get what you pay for, not saying all the other kits are bad but if you have the money...than Full-Race

 

Full-Race is the only kit I will ever buy, great products and even better service!!
I have heard great things about fab-works and imo rev hard is not even in the same league.

 

full-race doohhh!!!

full race is gonna be the highest quality

 

DAAAMMMMNNNN full race huh........well then boys we gonna go FULL RACE&gt;&gt;&gt;

yo any one with FABWORKS TURBO KIT speak up i wanna know how the kit is.........


thanks everyone for the input.

 

a simple archieved search for fab-works brought up these...

https://honda-tech.com/zerothread?id=1306595

https://honda-tech.com/zerothread?id=1333345

 

I say PeakBoost. I was going to go with Full-Race but due to poor customer service I looked else where. I also looked at ALL the kits, then I came across Phoenixturbo's PeakBoost kit. Same high quality componets but a grand cheaper. Bottom line is call Ken(1-877-23TURBO), hes there for the racer, I have NEVER had better customer service.....


Modified by BigBlock at 3:41 PM 8/19/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BigBlock &raquo;</TD></TR><TR><TD CLASS="quote"> I say PeakBoost. I was going to go with Full-Race but due to poor customer service I looked else where. I also looked at ALL the kits, then I came across Phoenixturbo's PeakBoost kit. Same high quality componets but a grand cheaper. Bottom line is call Ken(180023TURBO), hes there for the racer, I have NEVER had better customer service.....</TD></TR></TABLE>

thanks, but its 877-23-turbo

heres a pic of the PeakBoost 321ss manifold:

lifetime warranty

we just had a customer call us today from GA with reports of a 9sec PeakBoost pass..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BigBlock &raquo;</TD></TR><TR><TD CLASS="quote"> I say PeakBoost. I was going to go with Full-Race but due to poor customer service I looked else where. I also looked at ALL the kits, then I came across Phoenixturbo's PeakBoost kit. Same high quality componets but a grand cheaper. Bottom line is call Ken(180023TURBO), hes there for the racer, I have NEVER had better customer service.....</TD></TR></TABLE>

ive never had any problems with customer service through full-race man. what problem did you have?!?!

 

Hey, Thanks for your interest in our kit. Yes we are new but theres a good amount of me people out there running our kits. Here is a link to some of the uys hereon h-t.
https://honda-tech.com/zerothread?id=1341719
https://honda-tech.com/zerothread?id=1274019
https://honda-tech.com/zerothread?id=1247241

Thats just a few. Either whom u pick fab-works, peak boost, or full-race. You will get great customer service and quality products.

Yes we are a new company a little over a year. Some of our project cars will be coming out in a few months to show what our kits are capable of. Keep on the look out!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhoenixTurbo.com &raquo;</TD></TR><TR><TD CLASS="quote">

thanks, but its 877-23-turbo

heres a pic of the PeakBoost 321ss manifold:

lifetime warranty

we just had a customer call us today from GA with reports of a 9sec PeakBoost pass.. </TD></TR></TABLE>

HAHA!! Ken! But I got you beat, I finally ran my OBX Turbo kit cost me ($1000 total kit price) Went 8.60's 160mph Street class car, full interior, 22inch slicks! I only had to reweld the mani after every pass, well worth a $1000 for a whole kit and it has BLING EFFECT!!!! lol NOT!

But for real, all these kits are great, from the pics I see of Peakboost and Fab Works they look great, I have seen One Fab in person and it is TOP QUALITY too!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!

 

fixed

 

One fabs kist are awesome too.

 

ok so the general consenses is full-race, one-fab, fab-works, peakboost are all great top-notch kits and you will be happy with all of them. so basically it comes down to the misc parts that come with it, availability, price, customer service.

 

the funny thing is that Fab-works has a kit for 94-01DC2 b-series for 2800.00 on his website....but he quoted me 4000.00 w/ free shipping....


Whatever, guess i'm gonna go w/ full-race of peakboost....


Modified by asefi944 at 4:20 PM 8/19/2005

 

One thing for Full Race they are Robotically TIG Welded less the collectors(which they should be doing soon if not already). The WELDS are AMAZING none the less! Really, thought I would at least throw that in too. Again all kits mentioned are great, it comes down to not so much HOW DEEP YOUR POCKETS ARE BUT how much you want to spend and also which styles and features of each you like. The original poster is wanting an AC compatible kit I believe so the backdoor IC is not an issue here since his kit will need an inlet and outlet on opposite ends. Good luck again with your search, best thing is to call each Manufacturer adn whoever you feel most comfortable with GO GET IT!