hi guys, just about to install cams and valve springs and have done a search on the forum. Cannot find any detailed info on the install procedure or torque specs for re -tightening everything... (my bad cannot get my hands on helms) any help from anyone or any links to threads detailing the install would be great. If your in Australia then i can help out with a carton of beer for the help if your near by!!!!!


Cheers

 

https://honda-tech.com/zerothread?id=875493

 

.....try the how-to on http://www.c-speedracing.com.

and use the helms for torque specs. make sure you use a coathanger or screwdriver to get the timing belt tensioner nice and tight.

 

would anyone be a great help and post the torque specs needed??? this would be great!!!

 

Correct me if I'm wrong, but I believe it's 20ft-lbs on the 12mm bolts and 7.5ft-lbs on the 10mm bolts. Remember to tighten them in a sequence.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jansenrw &raquo;</TD></TR><TR><TD CLASS="quote">would anyone be a great help and post the torque specs needed??? this would be great!!!</TD></TR></TABLE>


.....buy the helms manual or download it.

Don't cheap out on something that can be had for $60 when your $1500 head is at stake.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black R &raquo;</TD></TR><TR><TD CLASS="quote">.....buy the helms manual or download it.

Don't cheap out on something that can be had for $60 when your $1500 head is at stake..... </TD></TR></TABLE>

Even an inexpensive Haynes or Chilton manual available at the local auto parts store would be very helpful.

 

guys any links to buy or download, here in Aus, have not seen any manuals for the itr... will willingly pay 60 usd for it... so the links???

 

http://www.helminc.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jansenrw &raquo;</TD></TR><TR><TD CLASS="quote">guys any links to buy or download, here in Aus, have not seen any manuals for the itr... will willingly pay 60 usd for it... so the links???</TD></TR></TABLE>

The two manuals I mentioned (Haynes and Chilton) are not ITR-specific, but instead cover basically all '94-'01 Integras. The Helm is obviously more comprehensive, but the Haynes and Chilton manuals are still extremely helpful, inexpensive, and can be found at almost any large auto parts store here in the U.S. (not sure about down under though).

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jansenrw &raquo;</TD></TR><TR><TD CLASS="quote">guys any links to buy or download, here in Aus, have not seen any manuals for the itr... will willingly pay 60 usd for it... so the links???</TD></TR></TABLE>


.....pm me and I'll email you the .pdf in a .zip file.

 

As a special service to ITR members ONLY! Email me and I can send certain pages of the Helms manual in .pdf. I have access to the Helm's manual for all of Acura's vehicle. But please do not flood me with request, Just limit them to emergency situations. Deal?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by len &raquo;</TD></TR><TR><TD CLASS="quote">As a special service to ITR members ONLY! Email me and I can send certain pages of the Helms manual in .pdf. I have access to the Helm's manual for all of Acura's vehicle. But please do not flood me with request, Just limit them to emergency situations. Deal? </TD></TR></TABLE>

If that's the case...WHY DO YOU KEEP CALLING ME FOR TORQUE SPECS!!
.
.
.
.
.
.
.
.
.
loser.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eva01 &raquo;</TD></TR><TR><TD CLASS="quote">

If that's the case...WHY DO YOU KEEP CALLING ME FOR TORQUE SPECS!!
.
.
.
.
.
.
.
.
.
loser. </TD></TR></TABLE>


.....sorry, that was me.

And if it's any consolation - it's because I know you're a reliable source with helms handy + I'm never at home to reference mine in an emergency.

I left a .pdf copy of the helms with Padawan, so if the aussie guy needs it all he needs to do is send a pm for a copy.....

 

thanks guys.. you u.s. amaze me.... oh bu the way, i'm heading over to the states in october 3rd - 18th visiting boston, NYC, vegas, L.A. if any of you are in these areas would love to meet up, and BLACKR will buy you a beer....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jansenrw &raquo;</TD></TR><TR><TD CLASS="quote">thanks guys.. you u.s. amaze me.... oh bu the way, i'm heading over to the states in october 3rd - 18th visiting boston, NYC, vegas, L.A. if any of you are in these areas would love to meet up, and BLACKR will buy you a beer....</TD></TR></TABLE>


.....so did padawan email it to you? Or do I need to?



-lmk

 

still in need

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jansenrw &raquo;</TD></TR><TR><TD CLASS="quote">still in need </TD></TR></TABLE>

You never contacted me, and I wasn't certain whether you wanted me to send it. I'll send it via Dropload tonight using the email you've provide in your profile.

 

The file's been sent. Let me know when you pick it up and if there were any problems.