Which Short Shifter is better?
Member
Joined: Jul 2003
Posts: 5,738
Likes: 0
Joined: Mar 2004
Posts: 1,752
Likes: 0
From: found, you, usa
Re: (Dc2 Powered)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dc2 Powered »</TD></TR><TR><TD CLASS="quote">theres already a huge thread on this</TD></TR></TABLE>Haha, yeah i didnt expect this much attention from my post but yeahh... It was between the b and m and the skunk 2... I got the b and m with with an energy suspension... There both good id say go with whatever is cheaper...PM <U>savageautosports</U> I bought mine from him, he is a good seller 
Trending Topics
Junior Member
Joined: Jan 2005
Posts: 810
Likes: 0
From: LA, CA, USA
i hate my B&M shifter!
it rattles like a **** when im on the highway! at around 3500 RPM and lettin off the gas it rattles.... aghh
ive had to periodcally go under it and tighten the nut, and im using thread locker!! shizzz im just gonna buy a skunk2 one
it rattles like a **** when im on the highway! at around 3500 RPM and lettin off the gas it rattles.... aghh
ive had to periodcally go under it and tighten the nut, and im using thread locker!! shizzz im just gonna buy a skunk2 one
Joined: Mar 2004
Posts: 1,752
Likes: 0
From: found, you, usa
Re: (Kingpin_teg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kingpin_teg »</TD></TR><TR><TD CLASS="quote">i hate my B&M shifter!
it rattles like a **** when im on the highway! at around 3500 RPM and lettin off the gas it rattles.... aghh
ive had to periodcally go under it and tighten the nut, and im using thread locker!! shizzz im just gonna buy a skunk2 one</TD></TR></TABLE>Damn does everyone have that problem? I have an energy suspension will that deter it any?
it rattles like a **** when im on the highway! at around 3500 RPM and lettin off the gas it rattles.... aghh
ive had to periodcally go under it and tighten the nut, and im using thread locker!! shizzz im just gonna buy a skunk2 one</TD></TR></TABLE>Damn does everyone have that problem? I have an energy suspension will that deter it any?
Member
Joined: Jan 2003
Posts: 2,218
Likes: 0
From: San Fernando Valley (818)
Re: (Dc2 Powered)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dc2 Powered »</TD></TR><TR><TD CLASS="quote">theres already a huge thread on this</TD></TR></TABLE>
Cogent Argument Enthusiast
Joined: Apr 2005
Posts: 8,029
Likes: 0
From: Solving riddles, Gotham
Re: (97 GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97 GSR »</TD></TR><TR><TD CLASS="quote">Damn does everyone have that problem? I have an energy suspension will that deter it any?</TD></TR></TABLE>
i have a B&M in my DA, my friend has a skunk2 in his DA. mine is better, hands down, we both agreed on this. and we both have energy suspension bushings, but my shifter is alot more tighter and less vague. only problem is the shifter hits the heat shield so when i get the ambition to take it off, it will be fine.
i have a B&M in my DA, my friend has a skunk2 in his DA. mine is better, hands down, we both agreed on this. and we both have energy suspension bushings, but my shifter is alot more tighter and less vague. only problem is the shifter hits the heat shield so when i get the ambition to take it off, it will be fine.
Honda-Tech Member
Joined: Jan 2003
Posts: 1,812
Likes: 0
From: Anytown, USA
Re: (benb18a)
on the subject where can you buy a C's shifter the only place i knew that had them was jdmspecperf.com but he was bought out by password. Id like to get one if anyone knows where one can buy one
Thread
Thread Starter
Forum
Replies
Last Post
