i replaced my fans with slim fans and wired them in the same as the stock fans were. now i'm hitting a probelm that when i turn on my a/c that it doesn't stay on so my a/c hardy works cuz the fan doesn't pull across my condesor, any suggestions? i really don't wanna have to hard wire it.

 

are the fans blowing the right way?

 

yes they are blowing the right way, the problem is the engine fan turns on but the a/c won't stay on while the a/c is on

 

recheck the wiring, did you test the fan itself to make sure its a working unit?

 

have you tried wiring the fan through the pressure cycling switch?

 

the fan works it turnson with the other fan. just doesn't turn on with the a/c. i just cliped the wires from the stock fans and connected them with the stock plugs from the new fans

 

ok, so, they both come on when the ecu turns them on for cooling, but, when you turn the AC on, they dont come on with AC? if thats the case, maybe you missed something in the wiring. check the wiring again, and make sure none of the fuses are blown.

neil

 

thing is i only unhooked two sets of wires which i hooked back up.