OHIO FS: GSR Gauge Cluster, VTEC Head, B16A Brackets, Distributor, more...
Thread Starter
Honda-Tech Member
Joined: May 2001
Posts: 892
Likes: 0
From: Columbus, OH, USA
OHIO FS: GSR Gauge Cluster, VTEC Head, B16A Brackets, Distributor, more...
All offers are pretty negotiable so either message me here by private message, or send me an email at jthornburg@hotmail.com and put a subject line so it does not look like junk mail!
92 Integra GSR Transmission ~~~$300 OBO +shipping
-In need of a rebuild, this is a short-geared USDM 92 Integra GSR Transmission with the 4.400 final drive.
-I pulled this out of my car with the equivalent of around 175,000 miles, so it has some wear but is rebuildable.
-This is a cable tranny.
-I replaced this with a JDM short-geared transmission with a Quaiffe so I don't need it anymore.
90-93 Integra Stock Rear Shocks/Stock Springs ~~~$30 OBO +shipping
-These come complete, with the hats, springs, and shocks completely assembled.
-In perfect working order.
92 Integra GSR Gauge Cluster ~~~SOLD!!!
92 GSR (B17A VTEC) Cylinder Head ~~~SOLD!!!
90-93 Integra 5-speed Gauge Cluster ~~~$45 OBO +shipping
-Redline is right around 6500 RPM
-Slight rubbing marks on bottom corners.
-Everything is in working condition... a good cluster.
http://img204.imageshack.us/my...b.jpg
http://img204.imageshack.us/my...g.jpg
http://img204.imageshack.us/my...y.jpg
90-93 Integra Automatic Gauge Cluster (USE for parts) ~~~$10 OBO +shipping
-Speedometer is from the above mentioned GSR gauge cluster so it doesn't work.
-Coolant guage does not work.
-Clear cover is cracked at bottom, and has chemical stains on it.
-Tachometer and gas gauge work... would be good for parts if someone has broken their gauges putting in white face gauges.
http://img204.imageshack.us/my...f.jpg
http://img204.imageshack.us/my...a.jpg
B16A/B17A Air Conditioning (AC) Brackets ~~~$25 Each OBO +shipping
-Meant for 90-93 Integras
- PR3 is cast into them.
-Should fit any B16A or B17A and the brackets come with the idler pulleys. Does not include bolts to bolt the bracket to the block.
http://img204.imageshack.us/my...a.jpg
B16A/B17A Distributor ~~~SOLD!!!
B16A/B17A Power Steering Bracket ~~~$10 OBO +shipping
-Comes with both the upper and lower half.
http://img204.imageshack.us/my...i.jpg
B16A/B17A Alternator Bracket ~~~$10 OBO +shipping
-Holds the alternator itself, to the block
http://img204.imageshack.us/my...y.jpg
B16A/B17A Drivers Side Motor Mount ~~~$10 OBO +shipping
-This the bottom half of the motor mount, that mounts directly to the block, and goes through the timing belt.
http://img204.imageshack.us/my...e.jpg
92 B17A Oil Pan ~~~$30 OBO +shipping
-Should fit B16A also
-Used and slightly scratched, but very useable
More pictures: http://palpatine.infinitedata....ILpan
3 (Three) B17A Pistons & Rods ~~~ $60 +shipping
-Looks to be in great shape but is in unknown condition
-Came from blown engine which threw a rod
-Have P61 markings on connecting rods
-Prefer not to separate connecting rods from pistons
-Piston from #2 cylinder has cosmetic nicks on underside of piston. The other two show no signs of any damage.
Pictures: http://palpatine.infinitedata...._rods/
All of these parts came from my 1992 Acura Integra GSR unless otherwise noted. My vehicle had 165,xxx when all of these parts were removed. Please click the links to see pictures for each part. If you have any questions or would like to see more detailed pictures of items, please feel free to ask if you are seriously interested. All of the items are best offer and so long as you are seriously interested, I will entertain any offers.
Paypal is preferred but money order will be accepted under one condition: the buyer MUST understand that their parts will not be shipped out until the amount enclosed is cleared at the bank. This is to protect myself from monetary fraud and/or bounced payment and this will add additional shipping time (Estimated 7-10 days). To protect the buyer, my shipping information and my cell-phone number can be given out for contact reasons at the buyer's request. I expect the same courtesy from the buyer.
All items are sold AS IS and while I would never deliberately sell any item in non-working condition, I can not promise that these parts will work as promised since I don't have the tools or time to test them properly. Please keep in mind that all the engine parts were removed from a blown engine.
Modified by mojoGSR92 at 11:18 AM 10/7/2005
Modified by mojoGSR92 at 11:20 AM 10/7/2005
92 Integra GSR Transmission ~~~$300 OBO +shipping
-In need of a rebuild, this is a short-geared USDM 92 Integra GSR Transmission with the 4.400 final drive.
-I pulled this out of my car with the equivalent of around 175,000 miles, so it has some wear but is rebuildable.
-This is a cable tranny.
-I replaced this with a JDM short-geared transmission with a Quaiffe so I don't need it anymore.
90-93 Integra Stock Rear Shocks/Stock Springs ~~~$30 OBO +shipping
-These come complete, with the hats, springs, and shocks completely assembled.
-In perfect working order.
92 Integra GSR Gauge Cluster ~~~SOLD!!!
92 GSR (B17A VTEC) Cylinder Head ~~~SOLD!!!
90-93 Integra 5-speed Gauge Cluster ~~~$45 OBO +shipping
-Redline is right around 6500 RPM
-Slight rubbing marks on bottom corners.
-Everything is in working condition... a good cluster.
http://img204.imageshack.us/my...b.jpg
http://img204.imageshack.us/my...g.jpg
http://img204.imageshack.us/my...y.jpg
90-93 Integra Automatic Gauge Cluster (USE for parts) ~~~$10 OBO +shipping
-Speedometer is from the above mentioned GSR gauge cluster so it doesn't work.
-Coolant guage does not work.
-Clear cover is cracked at bottom, and has chemical stains on it.
-Tachometer and gas gauge work... would be good for parts if someone has broken their gauges putting in white face gauges.
http://img204.imageshack.us/my...f.jpg
http://img204.imageshack.us/my...a.jpg
B16A/B17A Air Conditioning (AC) Brackets ~~~$25 Each OBO +shipping
-Meant for 90-93 Integras
- PR3 is cast into them.
-Should fit any B16A or B17A and the brackets come with the idler pulleys. Does not include bolts to bolt the bracket to the block.
http://img204.imageshack.us/my...a.jpg
B16A/B17A Distributor ~~~SOLD!!!
B16A/B17A Power Steering Bracket ~~~$10 OBO +shipping
-Comes with both the upper and lower half.
http://img204.imageshack.us/my...i.jpg
B16A/B17A Alternator Bracket ~~~$10 OBO +shipping
-Holds the alternator itself, to the block
http://img204.imageshack.us/my...y.jpg
B16A/B17A Drivers Side Motor Mount ~~~$10 OBO +shipping
-This the bottom half of the motor mount, that mounts directly to the block, and goes through the timing belt.
http://img204.imageshack.us/my...e.jpg
92 B17A Oil Pan ~~~$30 OBO +shipping
-Should fit B16A also
-Used and slightly scratched, but very useable
More pictures: http://palpatine.infinitedata....ILpan
3 (Three) B17A Pistons & Rods ~~~ $60 +shipping
-Looks to be in great shape but is in unknown condition
-Came from blown engine which threw a rod
-Have P61 markings on connecting rods
-Prefer not to separate connecting rods from pistons
-Piston from #2 cylinder has cosmetic nicks on underside of piston. The other two show no signs of any damage.
Pictures: http://palpatine.infinitedata...._rods/
All of these parts came from my 1992 Acura Integra GSR unless otherwise noted. My vehicle had 165,xxx when all of these parts were removed. Please click the links to see pictures for each part. If you have any questions or would like to see more detailed pictures of items, please feel free to ask if you are seriously interested. All of the items are best offer and so long as you are seriously interested, I will entertain any offers.
Paypal is preferred but money order will be accepted under one condition: the buyer MUST understand that their parts will not be shipped out until the amount enclosed is cleared at the bank. This is to protect myself from monetary fraud and/or bounced payment and this will add additional shipping time (Estimated 7-10 days). To protect the buyer, my shipping information and my cell-phone number can be given out for contact reasons at the buyer's request. I expect the same courtesy from the buyer.
All items are sold AS IS and while I would never deliberately sell any item in non-working condition, I can not promise that these parts will work as promised since I don't have the tools or time to test them properly. Please keep in mind that all the engine parts were removed from a blown engine.
Modified by mojoGSR92 at 11:18 AM 10/7/2005
Modified by mojoGSR92 at 11:20 AM 10/7/2005
