Buddyclub stage 5 cams For sale.Allmotor monsters. buddyclub 5
Like it says.. These were used for 30 min of dyno tuning and have less then 30 miles of street driving on them. These cams made the same power as the 4's (approx 250whp on my car)but i didnt get to adjust my cam gears because of my 1mm oversize valves. These are serious cams for motors that run at least 12.0 cr and up..I feel they will be good for at least 7-10 whp more over the 4's with more gear tuning..
I'm accepting reasonable offers on them.. remeber these things still look brand new.. Cam gear bolts on my motors get tq'd to 36 ftlb instead of 42 like most do so you can be assured there hasent been any added stress to the ends where the gears bolt on.. No air tools are used on any of my cams either.
I can take pics if you guys are interested..
I'm accepting reasonable offers on them.. remeber these things still look brand new.. Cam gear bolts on my motors get tq'd to 36 ftlb instead of 42 like most do so you can be assured there hasent been any added stress to the ends where the gears bolt on.. No air tools are used on any of my cams either.
I can take pics if you guys are interested..
Thread
Thread Starter
Forum
Replies
Last Post
russian_racer
Forced Induction
6
Jun 6, 2003 01:26 AM





