I've got a 99 Prelude with a Greddy turbo and front mount. I've sleeved the cyliders, Endyne pistons, and Eagle rods. Replaced the valves by Endyne, Skunk2 retainers and springs, ACT clutch, and a Greddy exhaust. I'm running the Hondata s200 obd2 ecu w/ boost option. A week after the engine rebuild, my tensioner for my timing belt broke. Many months later, the problem was fixed? On the dyno we go. 180hp at 7lbs of boost... That's less than stock. My Vtec's no longer working, I have a serious oil consupmtion problem and 2000 miles later, the tensioner goes out again. Back in the shop. It's been over 2 months now. I'm kinda relying on them to at least get it running, hopefully i'm as lucky as the last time this happened and my internals are still straight, but I need to find someone who really knows what they're doing and can help me get some real hp from my ride.

 

PM'ed.

Jason

 

Ditch the auto-tensioner....

 

auto tentioner =bad ..... h23 man tentioner= gooooood

 

that's what i was thinking. How might I go about the conversion?

 

i would recomend doing a search, but if nobody on here has any info, i read a bunch of stuff on http://www.cb7tuner.com i just cant remember where i read it... but there were pictures and everything of what you need.. if i find it i will post it for ya...

I FOUND IT....

http://www.cb7tuner.com/vbb/showthread.php?t=882

THAT SHOULD BE ALL YA NEED... has part numbers and everything...

 

That is some serioius help. My car still sits lonely in the shop, definitely need to get this handled before I get it up and running again. Hopefolly all my internals are still straight. Much thanks for the knowledge.

 

good luck with ur ride, i have the greddy kit on my ride and its alot of fun to drive around.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22a4turbocharge &raquo;</TD></TR><TR><TD CLASS="quote">I'm running the Hondata s200 obd2 ecu w/ boost option. </TD></TR></TABLE>

you can run hondata with obd2 now?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NuclearB18B &raquo;</TD></TR><TR><TD CLASS="quote">

you can run hondata with obd2 now?</TD></TR></TABLE>

ofcourse u can... OBD2-1 hardness.. P28 ecu + s200b =

if anyone lookin for one.. look below..
price is OBO.
https://honda-tech.com/zerothread?id=1319670

 

i thought you meant you were using an obd2 ecu. my bad.