Hey I got the Prestone "Flush n' Fill" Kit. There is a T that needs to be installled in the heater inlet hose but i cant find it. The directions say:

"Two heater hoses extrend from the firewall to the engine.Hose #1 runs from the firewall to the water pump. Hose #2 runs from the firewall to the top of the engine.This is the heater inlet hose."

I foudn the two hoses but one runs to the thermostat housing the the other run to the cylinder head so i am not sure which one to splice the TEE into.

Can someone help I kno ppl have installed this before...

Thanks

 

up

 

there should be a hose that goes form the thermostat area to the firewall and it has a valve in between... gl