Everything going. im sick of spending money on shit. Turbo kit, GE sleeved block, wheels, everythin
Thread Starter
Member
Joined: Jan 2002
Posts: 2,274
Likes: 0
From: Earth sometimes, USA
Everything going. im sick of spending money on ****. Turbo kit, GE sleeved block, wheels, everythin
Ok people. I am SELLING EVERYTHING!
i have a whole basement full of parts i want to get rid of, and soon. first i will list a couple things i need:
-A Running, Good Shape LS, or b20 bottom end or maybe gsr, or whatever.
-a nice set of wheels with good tires, inquire with what you have
-maybe nice set of shocks/springs/coil overs, etc.
-b series header
Now. here is what i have.
--GE Sleeved b18a1, bore is at 84mm, had custom cp pistons/ crower billet rods
heres the story. i bought this block fully assembled and supposedly ready to go, but when it came time to put my motor together, i noticed slight scoring on the cylinder walls. i decided **** this, so i tore the block down, to find 2 pretty badly scored cp pistons, the other 2 were in OK shape yet. so most likely the block will need to be bored to 84.5mm. all 4 rods, and everything else in the block is in great shape yet. it has very few miles on it. you can tell by looking at the rod bearings becuase there is a coating on them when they are new, a white coating, and it hasnt even worn off all the way yet.
i am trying to work soemthing out with who i bought this from to correct this damage, but have not been successful as of yet
i am not sure what kind of price to ask for this yet, but am very much open to taking offers.
---Brand new Garret 57 trim turbo(either 50 or 57 trim) .60(cold), .63a/r hot- i paid 500 for it.
---Have a SS Tubular manifold- its the new style OBX( great quality actually)
---3" downpipe to work with this manifold, maybe others. for compressor on driver side---both brand NEW by the way
---4-15" very nice shape 99-00 SI wheels/no tires-250, no less
---bare LS b18b1 block, great shape
--- complete LS b18b1 cylinder head/IM
--- set of 4 92-93 integra gsr 14" wheels/tires-100
---set of 4 92-95 prelude si wheels/tires--100
---Tial style 46mm wastegate and dumptube
--- HKS ecvIV electronic boost controller
--- 2.5" aluminized steel IC piping--??
---2-1/2" manual cut out--30
---also have 3" manual cut out--30
--- have a bunch more stuff, i will update later on tonight
i have a whole basement full of parts i want to get rid of, and soon. first i will list a couple things i need:
-A Running, Good Shape LS, or b20 bottom end or maybe gsr, or whatever.
-a nice set of wheels with good tires, inquire with what you have
-maybe nice set of shocks/springs/coil overs, etc.
-b series header
Now. here is what i have.
--GE Sleeved b18a1, bore is at 84mm, had custom cp pistons/ crower billet rods
heres the story. i bought this block fully assembled and supposedly ready to go, but when it came time to put my motor together, i noticed slight scoring on the cylinder walls. i decided **** this, so i tore the block down, to find 2 pretty badly scored cp pistons, the other 2 were in OK shape yet. so most likely the block will need to be bored to 84.5mm. all 4 rods, and everything else in the block is in great shape yet. it has very few miles on it. you can tell by looking at the rod bearings becuase there is a coating on them when they are new, a white coating, and it hasnt even worn off all the way yet.
i am trying to work soemthing out with who i bought this from to correct this damage, but have not been successful as of yet
i am not sure what kind of price to ask for this yet, but am very much open to taking offers.
---Brand new Garret 57 trim turbo(either 50 or 57 trim) .60(cold), .63a/r hot- i paid 500 for it.
---Have a SS Tubular manifold- its the new style OBX( great quality actually)
---3" downpipe to work with this manifold, maybe others. for compressor on driver side---both brand NEW by the way
---4-15" very nice shape 99-00 SI wheels/no tires-250, no less
---bare LS b18b1 block, great shape
--- complete LS b18b1 cylinder head/IM
--- set of 4 92-93 integra gsr 14" wheels/tires-100
---set of 4 92-95 prelude si wheels/tires--100
---Tial style 46mm wastegate and dumptube
--- HKS ecvIV electronic boost controller
--- 2.5" aluminized steel IC piping--??
---2-1/2" manual cut out--30
---also have 3" manual cut out--30
--- have a bunch more stuff, i will update later on tonight
Trending Topics
Thread Starter
Member
Joined: Jan 2002
Posts: 2,274
Likes: 0
From: Earth sometimes, USA
Re: Everything going. im sick of spending money on ****. Turbo kit, GE sleeved block, wheels, every
turbo, manny, downpipe, oil lines, wastegate, oil pan, IC, IC piping, BOV, all SOLD
Thread
Thread Starter
Forum
Replies
Last Post
ALLOUT CL55
Northern California (Sales)
20
Jan 8, 2007 05:01 PM