alright ive been workin on this car forever rebuilt the bottom end and built the top end 92 h23 prelude. yesturday i finally got it all back together and fired it up ran fine went out to break it in and the first couple of pulls it ran great and pulled real hard but then i drove it somemore and started to notice that it was cutting out really bad anything ove half throttle and 3000rpm i got it back home and noticed that the knock sensor was broke so i got another one from one of my friends from a Vtec d16 the plug ins were te same but im wondering if this could still be the problem because i installed it pluged it in and it still runs like **** any i deas would help very much becasue the car has to be drivin to pheonix tomorrow


Modified by lude of pre 2.3 at 4:10 PM 7/22/2005

 

im dealing with a studder as well ..ive change/replaced everything i can think of ..im gonna try my fuel filter and if needed the pump ...ill let you know if it helps

 

my fuel filter is brand new and there is fuel pressure i think my O2 sensor might be bad becasue i think im runnin so rich that its blowin the spark out could be wrong we'll find out