Is it possible, for the time being at least to wire a boost gauge and oil pressure gauge to the laptop. Like it would show on the screen? Has anyone done this?

 

You can using AEM's digital dash. How about a pinch more info, like what kind of EMS you're running first.

 

Ah, My apologies. I will be runnin Uberdata off of the laptop, chipped ECU from Moates, 450's.
Also getting the Datalogging up and going.

 

I know PLX can do that with it's datalogging wideband.

 

Bump for anymore info.

 

http://www.ecucontrol.com/

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MooreBoost &raquo;</TD></TR><TR><TD CLASS="quote">I know PLX can do that with it's datalogging wideband.</TD></TR></TABLE>

Yeah, the PLX has a pretty good "digital dashboard". Uberdata datalogging will not have any of the "gauge face" read outs only line graphs and number boxes w/ the info dipslayed.

Phil

 

Uberdata datalogs, ECU Control is decent, Freelog is now one of the better dataloggers out now. Or you can spend the $150 and get Crome Pro and have a full tuning/datalogging suite that works quite well.

 

crome pro

 

Isn't there generic software that connects to your diagnostic port for obd-2 that can be picked up at most autoparts stores?

 

there should be. But I dont know if depending on what software u use if it can display all that. I used snap on diagnostic tool and its got some cool features too for obd2 cars.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbo_civic_si &raquo;</TD></TR><TR><TD CLASS="quote">http://www.ecucontrol.com/</TD></TR></TABLE>

Should find what you're lookin for there.